Lets see if we can start a thread about boats

[ogshotgun]

Put this under a FE or B/RB and you'll know why.
Consider the distance from the centerline of the crank to the bottom of this pan. Remember, the pan rail on a Chevy is the centerline of the crank. On a B/RB the pan rail about 3" below. So with the same pan depth, the B/RB is going to have about an additional 3" you have to deal with if you use a pan that deep. Its a nice pan and the bottom is slanted to account for the tilt of the engine in a V drive, but damn its deep.

i understand what your saying but tho pan is the same depth as the factory center sump its replacing only difference is its full length and ...