Lets see if we can start a thread about boats

[gn7]

Here is a Thread build of OG boat in the v drive section. http://www.hotboat.com/frm/showthrea...-2013-phase-II

Saw it. lot of "show" very little "tell"
I wouldn't want to try and restore a row boat with the content in that thread. Look more like a photo album from his Facebook page.
Cool stuff, cool boat. But from a guy BITCHING about content, I would have expected a more than LAM thread.

[SnoC653]

Saw it. lot of "show" very little "tell"
I wouldn't want to try and restore a row boat with the content in that thread. Look more like a photo album from his Facebook page.
Cool stuff, cool boat. But from a guy BITCHING about content, I would have expected a more than LAM thread.

It is a cool boat he posted pictures of originally. As a project it is about where some of mine are, a long ways from being a boat again. He does seem to work hard, or at least someone is. But it might be best if he didn't give too much commentary on how to do things right. His explanation of jet boat headers is priceless. I even made it my signature line.

On looking back at the picture he posted, he might not have Jet Boat headers, but man is that engine angle up there. Not a good combination if you like to turn at speed..

[gn7]

It is a cool boat he posted pictures of originally. As a project it is about where some of mine are, a long ways from being a boat again. He does seem to work hard, or at least someone is. But it might be best if he didn't give too much commentary on how to do things right. His explanation of jet boat headers is priceless. I even made it my signature line.

On looking back at the picture he posted, he might not have Jet Boat headers, but man is that engine angle up there. Not a good combination if you like to turn at speed..

Lets not sugar coat this snoc. THEY ARE jet boat headers. The engine is not on that much angle.

you go river caves place and its all boats ..performance boats its all boats..hotboat.com,,,very little boats at all, what happened to this site ? from what i can several hundred members 5 with boating desires lol

Seriously? RDP is ALL BOATS ALL THE TIME. There is no more boating content over there than there is here, and most of it is WRONG!

well in a drag boat with a drive you run off the fly wheel my friend .. and if they were jet boat headers they would be pointing forward since jet boats are a direct connect to the flywheel

So, I take it that your heads are marked left and right, and no more interchangeable than the headers.

Using your logic, this must be V drive headers installed on a jet. OR, maybe you own this jet.
With your attitude, you may find yourself looking to the v drive experts at RPD for any advice you might need. I think that's where this guy gets his helpful tips.

[ogshotgun]

Lets not sugar coat this snoc. THEY ARE jet boat headers. The engine is not on that much angle.


Seriously? RDP is ALL BOATS ALL THE TIME. There is no more boating content over there than there is here, and most of it is WRONG!


So, I take it that your heads are marked left and right, and no more interchangeable than the headers. your right boat isn't set up to turn i didn't design the headers just bought them .. complain to rewarder if you don't like them sorry its what i got and if you want to send me a 1000 set of the ones you build for free send them on... is this your boat in the pic with reverse headers lol guess the heads are on the wrong side lmao...

Using your logic, this must be V drive headers installed on a jet. OR, maybe you own this jet.
With your attitude, you may find yourself looking to the v drive experts at RPD for any advice you might need. I think that's where this guy gets his helpful tips.

your right boat isn't set up to turn i didn't design the headers just bought them .. complain to rewarder if you don't like them sorry its what i got and if you want to send me a 1000 set of the ones you build for free send them on... is this your boat in the pic with reverse headers lol guess the heads are on the wrong side lmao...

[ogshotgun]

Lets not sugar coat this snoc. THEY ARE jet boat headers. The engine is not on that much angle.


Seriously? RDP is ALL BOATS ALL THE TIME. There is no more boating content over there than there is here, and most of it is WRONG!


So, I take it that your heads are marked left and right, and no more interchangeable than the headers.

Using your logic, this must be V drive headers installed on a jet. OR, maybe you own this jet.
With your attitude, you may find yourself looking to the v drive experts at RPD for any advice you might need. I think that's where this guy gets his helpful tips.

a pictures worth a thousand words so read the pictures very quietly lmao

[ogshotgun]

Saw it. lot of "show" very little "tell"
I wouldn't want to try and restore a row boat with the content in that thread. Look more like a photo album from his Facebook page.
Cool stuff, cool boat. But from a guy BITCHING about content, I would have expected a more than LAM thread.

at least its a boat instead of a train plane or a drink lmao