Dimarco cruiser

[2manymustangs]

The exhaust holes in the transom are filled. So I'm trying to decide if I should build new straight pipes or modify these to merge into one. Either way they are still going to be thru-transom and above the water line. If I merge them, they will end up with one oval shaped tip about 4" x 7". It will sound bitchin merged but it might be a bitch to work on. Opinions................
Attachment 36777Attachment 36778

You could always go Old School VW Dune Buggy...

[JusTrouble]

Ya, maybe everybody deserves a day off or two but I look forward to looking at your billet porn and unobtainium (you crack me up GN7) everyday and this dry spell has gone on long enough Westernaero. Post something man!

[WESTERNAERO]

No machine porn, I'm doing glasswork. The transom is all filled in and I've been applying gel and long blocking it in. I've got one more block session and it with be ready for final spray. Still need to mixed up a color matched batch of gel for this which is a pain. The inner transom is also finished but I need to go get a laminate to glass on for a nice wood finish. The floors and stringers I've been sanding and blocking so when I lay down the balsa and gel the finish work will be minimal.

[gn7]

So Bob, where can I get a hold of one of these little dolls???? building some 180's myself

Nick Volare @ Madskillz

626-786-7779

I would put a splitter on the collector or you'll have zero collector/scavange effect.

[Sharp shooter]

Will this boat get capped?

[WESTERNAERO]

Will this boat get capped?

Not right now and probably never. Between Parker and havasu I tie up to too many docks to make myself nervous.

[78Southwind]

You got a full picture of your boat out of the water you can put up? I thought your boat was light blue where the white is because of the water reflection picture.

[WESTERNAERO]

You got a full picture of your boat out of the water you can put up? I thought your boat was light blue where the white is because of the water reflection picture.

It's a really fucked up color, I like it but its going to be a real bitch to match. I've been calling it seafoam green but it's a grey, Wimbledon white and ford 60's seafoam all mixed together. I'll sea if I can find a good pic that truly shows the color.

[ogshotgun]

No machine porn, I'm doing glasswork. The transom is all filled in and I've been applying gel and long blocking it in. I've got one more block session and it with be ready for final spray. Still need to mixed up a color matched batch of gel for this which is a pain. The inner transom is also finished but I need to go get a laminate to glass on for a nice wood finish. The floors and stringers I've been sanding and blocking so when I lay down the balsa and gel the finish work will be minimal.

looking good nice work buddy

[JusTrouble]

I feel better now, even if it isnt machine porn. Thank you. Cant wait till tomorrow...