The time has come to start building new hardware for the boat.
This will include all new machined, by yours truly, cav plate hardware, strut, prop shaft, stringer rails, engine plates, throttle and down pedal assembly, drive line cover and other miscellaneous hardware.
I had planned on doing this project a few years ago but life gets in the way sometimes. Now it is time to finish it. This is the boat, sorry all the pictures I have at the moment.
Results 1 to 10 of 255
Thread: Dimarco cruiser
-
10-03-2013, 10:14 PM #1WESTERNAEROGuest
Dimarco cruiser
-
10-03-2013, 10:22 PM #2WESTERNAEROGuest
Some parts that I had already made before.
Cav plate stuff
This is a tail shaft housing for a TH400 that I made to replace the original one.
-
10-03-2013, 10:26 PM #3WESTERNAEROGuest
Tonight I started making the bearing housings for the down pedal and throttle assembly.
There will be three of these, I'll put up the finished pics after the weekend.
-
10-03-2013, 10:30 PM #4Senior Member
- Join Date
- May 2013
- Location
- Lake Havasu City/Havasu Palms
- Posts
- 3,998
Looking forward to watching your progress......Subscribed!!
-
10-03-2013, 10:37 PM #5WESTERNAEROGuest
Thought maybe I should include the CAD drawings as I go also. This is what the bearing housings above will end up being.
-
10-03-2013, 10:52 PM #6Senior Member
- Join Date
- Aug 2013
- Posts
- 1,646
DAAAAAAMN! This could get good!
-
10-03-2013, 10:58 PM #7WESTERNAEROGuestOh, you're back. I'll be looking forward to your input, I think.
Originally Posted by gn7
DAAAAAAMN! This could get good!
-
10-03-2013, 11:14 PM #8Senior Member
- Join Date
- Oct 2012
- Posts
- 3,045
Nice work! Looking forward to the rest
-
10-04-2013, 05:01 AM #9Senior Member
- Join Date
- Aug 2013
- Location
- Florida/LOTO
- Posts
- 5,212
Looks great to me already.
-
10-04-2013, 09:49 AM #10Senior Member
- Join Date
- Oct 2012
- Posts
- 19,130
Very cool. Do you own a shop or is this just an expensive hobby??
Reply With Quote
Bookmarks