Thank you, sir!
Results 31 to 36 of 36
Thread: 1966 Howard Walnut deck V drive.
-
02-16-2018, 10:35 AM #31Junior Member
- Join Date
- Feb 2014
- Location
- Longmont, Co and Parker, Az
- Posts
- 6
-
03-04-2018, 06:11 PM #32Member
- Join Date
- Oct 2012
- Location
- San Juan Capistrano
- Posts
- 35
Any update?
AKA ~ Brian Brown
-
06-17-2018, 01:10 PM #33Junior Member
- Join Date
- Jul 2017
- Location
- Athens, TN
- Posts
- 10
Been a very long time. Boat became an off again on again project as I took on a house exterior remodel, business volume increase and a darn cold winter that made work on the boat in my plant difficult. Fortunately in Tennessee, we skip spring and go directly from winter to full blown summer. Epoxy was sanded after my screw up of turning on a kerosene heater to help cure the epoxy. That was a very long process.
starting to put Urethane clear down. It's House of Kolor. Lays down nice and has a great UV inhibitor package. This is only two coats and will get six before wet sanding and polish. Thanks to all out there that helped me in the right direction.
-
06-17-2018, 10:32 PM #34Member
- Join Date
- Oct 2012
- Location
- San Juan Capistrano
- Posts
- 35
Looking awesome
Thanks for the update !!AKA ~ Brian Brown
-
06-18-2018, 07:33 PM #35Senior Member
- Join Date
- Dec 2012
- Posts
- 2,774
Wow!
Originally Posted by topolino2
Been a very long time. Boat became an off again on again project as I took on a house exterior remodel, business volume increase and a darn cold winter that made work on the boat in my plant difficult. Fortunately in Tennessee, we skip spring and go directly from winter to full blown summer. Epoxy was sanded after my screw up of turning on a kerosene heater to help cure the epoxy. That was a very long process.
starting to put Urethane clear down. It's House of Kolor. Lays down nice and has a great UV inhibitor package. This is only two coats and will get six before wet sanding and polish. Thanks to all out there that helped me in the right direction.
gotta love the wood deck! I can’t wait to see this thing finished!
Sent from my iPhone using Tapatalk
-
06-19-2018, 07:26 AM #36Junior Member
- Join Date
- Feb 2014
- Location
- Longmont, Co and Parker, Az
- Posts
- 6
Topolino, came out beautiful. Nice work. What sandpaper grit did you use for the final sanding prior to clear? Thanks! Originally Posted by topolino2
Been a very long time. Boat became an off again on again project as I took on a house exterior remodel, business volume increase and a darn cold winter that made work on the boat in my plant difficult. Fortunately in Tennessee, we skip spring and go directly from winter to full blown summer. Epoxy was sanded after my screw up of turning on a kerosene heater to help cure the epoxy. That was a very long process.
starting to put Urethane clear down. It's House of Kolor. Lays down nice and has a great UV inhibitor package. This is only two coats and will get six before wet sanding and polish. Thanks to all out there that helped me in the right direction.
Reply With Quote
Bookmarks