What prop are you running and why?
Results 1 to 4 of 4
-
09-13-2013, 10:54 PM #1Senior Member
- Join Date
- Jan 2013
- Posts
- 892
Dimarco/Howard/Spectra 20 Cruiser Owners
-
09-13-2013, 11:00 PM #2WESTERNAEROGuest
11-1/2 x 15 Menkens. Because that's what Teague had laying around when I needed a prop. Pretty sure I need a little more though.
Last edited by WESTERNAERO; 09-14-2013 at 10:19 AM.
-
09-13-2013, 11:26 PM #3Senior Member
- Join Date
- Jan 2013
- Posts
- 892
I am guessing this is a Menkens 3 blade 11 1/2" X 16 1/2". There's no make stamped into anywhere but I took a flashlight and I see a KE on it.
Last edited by 78Southwind; 09-13-2013 at 11:38 PM.
-
12-31-2013, 04:16 PM #4Junior Member
- Join Date
- May 2013
- Location
- Castro Valley, CA
- Posts
- 2
When I owned my Howard it was powered by a 450HP 454, turbo 400, Casale with 22's. I tried a few different props, but settled on a steel three blade built by Tom Black, it was a 12 X 15.
Reply With Quote
Bookmarks