25 daytona makeover

[Menace Marine]

I owned the boat less than two weeks and it was completely stripped.




Once the boat was stripped I pulled it off the trailer. No point doing all this work on the boat to drag it around on a worn out trailer.

Here is the trailer in the booth with some fresh paint.

A couple of pics once I got the boat back on the trailer.


It's tough to see in the picture but the front of the trailer where the beams come together has been filled in and carpeted. There is also a spare tire mount on the first cross member under the boat.
You can also see the mounts for the tool boxes on the front of the trailer. They got powder coated black to match.

[Menace Marine]

I did not take nearly enough pictures of the fiberglass stage. The bilge was sanded smooth and all the holes were filled. The exhaust was filled and moved up about 8 inches. The dash was filled and re sprayed and the entire boat was color sanded and buffed.

I don't have any good pictures of the dash or outside of the boat but this picture shows the transom with all the old holes filled in.