Quote Originally Posted by WESTERNAERO View Post
I just don't think it's necessary, especially if it's going to be digging into the shaft with screws. And really those set screws aren't going to do anything but slide if something does happen, unless there are flats or spotfaces cut into the side of the shaft. I'm sure you guys don't want to do that.
Kevin i have a ? on mine since the whirl away was installed its buttoned up pretty tight i don't have the room for a 1/2" wide split collar with a 1/4" both sides.. so my only option is to use what is pictured but much nicer its a 1" longer and it has holes drilled in left or right hand to lubricate the bearing it runs a 1/4" in front of the strut..the shop that makes these says to either use a drill and make a slight indention or mill a flat.. please let me know i have no option