Page 1 of 4 123 ... LastLast
Results 1 to 10 of 33
  1. #1

    25 daytona makeover

    I figured I would post some pictures of my 25 daytona re rig. I didn't do a very good job taking pictures along the way but I'll post what I have

    The boat is a 2000 Eliminator 25 daytona that I bought a year ago with a 454 and a stock bravo. Nothing special. Here are some before pics. I ran the boat once just to get some baseline numbers. It ran a blistering 55 mph on gps.
    Name:  246.jpg
Views: 2526
Size:  76.9 KB
    Name:  250.jpg
Views: 2539
Size:  91.9 KB
    Name:  256.jpg
Views: 2527
Size:  92.3 KB
    Name:  265.jpg
Views: 2502
Size:  87.0 KB
    Name:  267.jpg
Views: 2539
Size:  156.5 KB
    Name:  272.jpg
Views: 2532
Size:  91.9 KB
    Name:  284.jpg
Views: 2469
Size:  89.3 KB
    Name:  286.jpg
Views: 2526
Size:  91.5 KB
    You can see from the pictures the boat was in rough shape. It was complete and ran but definitely had been neglected.

  2. #2
    I owned the boat less than two weeks and it was completely stripped.
    Name:  344.jpg
Views: 2462
Size:  90.5 KB
    Name:  345.jpg
Views: 2461
Size:  96.3 KB
    Name:  346.jpg
Views: 2482
Size:  88.8 KB

    Once the boat was stripped I pulled it off the trailer. No point doing all this work on the boat to drag it around on a worn out trailer.
    Name:  374.jpg
Views: 2510
Size:  99.0 KB
    Here is the trailer in the booth with some fresh paint.
    Name:  384.jpg
Views: 2497
Size:  89.8 KB
    A couple of pics once I got the boat back on the trailer.
    Name:  398.jpg
Views: 2450
Size:  94.3 KB
    Name:  399.jpg
Views: 2483
Size:  96.9 KB
    It's tough to see in the picture but the front of the trailer where the beams come together has been filled in and carpeted. There is also a spare tire mount on the first cross member under the boat.
    You can also see the mounts for the tool boxes on the front of the trailer. They got powder coated black to match.
    Name:  400.jpg
Views: 2496
Size:  96.1 KB

  3. #3
    WMC
    Guest

    Re: 25 daytona makeover

    Great project are you keeping the same power? Keep us posted on the updates as they come

    Sent from my XT907 using Tapatalk 2
    Last edited by WMC; 12-07-2012 at 03:28 PM.

  4. #4
    I did not take nearly enough pictures of the fiberglass stage. The bilge was sanded smooth and all the holes were filled. The exhaust was filled and moved up about 8 inches. The dash was filled and re sprayed and the entire boat was color sanded and buffed.
    Name:  451.jpg
Views: 2461
Size:  64.0 KB
    I don't have any good pictures of the dash or outside of the boat but this picture shows the transom with all the old holes filled in.
    Name:  471.jpg
Views: 2455
Size:  85.0 KB

  5. #5
    Quote Originally Posted by WMC View Post
    Great project are keeping the same power? Keep us posted on the updates as they come

    Sent from my XT907 using Tapatalk 2
    The 454 was sold and a 950 hp whipple motor was planned. However I am no different than everyone else and I am seldom satisfied with a project for long. I ran the whipple motor twice before we built a 1230 hp fuel injected monster for it. Pictures of that to come. ah screw it. here's a teaser.
    Name:  226.jpg
Views: 2452
Size:  69.1 KB

  6. #6
    Wendi
    Guest

    25 daytona makeover

    Great stuff MM thanks for sharing this project!

  7. #7
    New motor looks awesome! How'd it run with the 950? Great looking boat

  8. #8
    Thanks for the kind words. I'll get more pics and info up soon.

  9. #9
    All the hardware on the boat was stripped and clear anodized. No more peeling purple powder coat. You can see the exhaust holes have not been drilled yet. I wanted to make sure the pipes would come out above the wing plates on the box and not interfear with the swim steps at all.
    Name:  584.jpg
Views: 2581
Size:  89.2 KB
    Ok, the holes are cut now. Anyone who has ever done this knows what a pain it is. A 5-1/2" hole saw will make kick your ass if your not careful.
    Name:  627.jpg
Views: 2274
Size:  86.9 KB
    Here is the motor that was going into the boat first. 540 ci BBC with dart pro 1 heads and a 3.3 whipple. Estimated 900-950hp.
    Name:  636.jpg
Views: 2238
Size:  96.4 KB
    Name:  637.jpg
Views: 2277
Size:  96.4 KB

  10. #10
    Quote Originally Posted by PokerRun388 View Post
    Great thread! I love that boat. My dad has the same make/model.

    I'm looking forward to seeing how the boat turns out. I love the new trailer and the standoff box.

    The trailer really did come out great. It is the first thing I do to just about every boat I buy. There is nothing worse than trailer problems in 120 degree heat in the middle of the desert. The standoff box was a controversial issue. Everyone said I wouldn't need it and they were right. I knew I didn't need it but I had it. The 25 daytona is a good handling boat and doesn't need a whole lot of help. I bought the motor standoff box and drive as a package for an unbelievable price. The box was basically free. Did I need it? No. Does it look bad ass? Ya

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •