Chris and Candace call out :o

Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

Quote:

---

Originally Posted by 2manymustangs

Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

---

Hey stranger!!! I’ll take some pictures for ya!! We are almost done with it. Working on the dry wall a little at a time when we have time. Don’t let me forget. Lol. [emoji16]


Sent from my iPhone using Tapatalk

No rush ;)

Here you go 2MM, I few I have in my phone
https://uploads.tapatalk-cdn.com/202...2a242695ab.jpghttps://uploads.tapatalk-cdn.com/202...c38858724b.jpghttps://uploads.tapatalk-cdn.com/202...a42834899e.jpghttps://uploads.tapatalk-cdn.com/202...edc17f2032.jpghttps://uploads.tapatalk-cdn.com/202...cae037c596.jpghttps://uploads.tapatalk-cdn.com/202...577a4845a5.jpg

It’s getting there slowly but Shirley

https://uploads.tapatalk-cdn.com/202...34e00c3132.jpg


Sent from my iPhone using Tapatalk

Looking good!

Did yall do the epoxy floor work yourself? Some of the effects on the epoxy floors are really spectacular :)

THanks for sharing...

I can't recall from the early photos, does the roof pitch in one direction OR is there a ridge line? I know that yall build differently in the west than on this side of the continental divide...

I'm looking at a 4/12 pitch truss roof, some attic trusses, some conventional and some Scissor trusses for a vault area (for a lift). 50x80 open/clear span with 2x6x12' frame walls.

My building site falls off about 6 foot from the s.e. corner to the n.w. corner so I'm looking at approximately 15K for a 8 foot tall concrete wall on three sides and then 6 feet of compacted limestone screening fill tapering off to nothing at the s.e. corner... I may even do a small cellar/basement area for well pressure tank/furnace/plumbing since we have freeze risks here...

Attachment 70171

Quote:

---

Originally Posted by 2manymustangs

Looking good!

Did yall do the epoxy floor work yourself? Some of the effects on the epoxy floors are really spectacular :)

THanks for sharing...

I can't recall from the early photos, does the roof pitch in one direction OR is there a ridge line? I know that yall build differently in the west than on this side of the continental divide...

I'm looking at a 4/12 pitch truss roof, some attic trusses, some conventional and some Scissor trusses for a vault area (for a lift). 50x80 open/clear span with 2x6x12' frame walls.

My building site falls off about 6 foot from the s.e. corner to the n.w. corner so I'm looking at approximately 15K for a 8 foot tall concrete wall on three sides and then 6 feet of compacted limestone screening fill tapering off to nothing at the s.e. corner... I may even do a small cellar/basement area for well pressure tank/furnace/plumbing since we have freeze risks here...

Attachment 70171

---

Attachment 70410

Looks nice Bruce.

Quote:

---

Originally Posted by RogerThat99

Looks nice Bruce.

---

Attachment 70430

Attachment 70431

Attachment 70432

Attachment 70433

Attachment 70434Attachment 70434

Thats quite the office wow

Boogity Boogity! Attachment 70436

Quote:

---

Originally Posted by 2manymustangs

Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

---

Flick N Boogers. I love it lol