Printable View
here i finished the body work on the fenders and primed them , i also built one bunk wrapped it in carpet used all stainless steel , carriage bolts, staples too Attachment 32485Attachment 32486Attachment 32487Attachment 32488Attachment 32489Attachment 32490Attachment 32491Attachment 32492Attachment 32493
That looks like A LOT of work!!! It's looking good!
[B]its a crazy amount of work lol should of sent it out lolQuote:
Originally Posted by hbchgirl
finished the other bunk today , bad weather not much else got done, mess got cleaned up for the rain tonight Attachment 32587Attachment 32588 and also got the mount for the draw bar mounted today no draw bar yet waiting on paint Attachment 32589also made this little cable for the draw bar pin , if you drop it , its right there!! no more lost pinsAttachment 32590Attachment 32591
What are the spacers for? Is that the way it was or did you want the boat so sit higher?
http://www.hotboat.com/frm/attachmen...7&d=1391648471
since the bunks are longer than the flat part of the hull the bunks bend down in the midgle and once the weight is on them it sits nice and cozy front to rearQuote:
Originally Posted by Sharp shooter
or better explanation the bottom of the hull is kind of banana shaped so when the center almost touches the frame both ends are frim on the bottom of the hull right below the stringers, i had to move them a few inches to get them under the stringers where they should beQuote:
Originally Posted by ogshotgun
Looking good. Spray paint?
mo its valspar low voc single stage shot out of a Iwata HVLP gun with a 1.3 mm tip and 35 pounds of air pressure in my back yard with calm winds lolQuote:
Originally Posted by GotHalos
break in the weather got the bottom side of the fenders painted Attachment 32751Attachment 32753Attachment 32754also mounted the draw bar pin retaining cable and put a pad where the draw bar sits when not attached Attachment 32755Attachment 32757
Its so hard to upload pictures here iam almost ready to give up on it third and last try i swear this is lameAttachment 32943Attachment 32944Attachment 32945Attachment 32946Attachment 32947Attachment 32948Attachment 32949
Thats it three trys over a hour of wasted time trying to share sorry no more pictures of progress.
Quote:
Originally Posted by ogshotgun
I have never had an issue uploading pictures. I'm not sure how you are doing it but click here: http://www.hotboat.com/frm/showthrea...-YOUR-Computer
or here:http://www.hotboat.com/frm/showthrea...ut-downloading
iam missing something don't have those options i also am on a IMACQuote:
Originally Posted by GotHalos
Looks like you got it figured out, good news.
GH and Admin both run MACS, so I know its possible :D
Are you running Tiger 10.4 on a G3 IMAC? :thumbsUp:Quote:
Originally Posted by ogshotgun
its just takes a long time and several times on my mac .. is there a easier way ? or is it that before 11;00 pm there is just too much traffic causing the issueQuote:
Originally Posted by Hotboat
its version 10.9 on a G4Quote:
Originally Posted by 2manymustangs
We're dedicated server, no way you can bog this boat down :DQuote:
Originally Posted by ogshotgun