Chris and Candace call out :o

[2manymustangs]

Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

[Mrs.K034]

Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

Hey stranger!!! I’ll take some pictures for ya!! We are almost done with it. Working on the dry wall a little at a time when we have time. Don’t let me forget. Lol. [emoji16]


Sent from my iPhone using Tapatalk

[2manymustangs]

No rush ;)

[K-034]

Here you go 2MM, I few I have in my phone
https://uploads.tapatalk-cdn.com/20200617/901cdbbae9065f54f6ddb22a242695ab.jpghttps://uploads.tapatalk-cdn.com/20200617/3d5f079939823129aa7824c38858724b.jpghttps://uploads.tapatalk-cdn.com/20200617/73a3ef2f14ae493a1964bba42834899e.jpghttps://uploads.tapatalk-cdn.com/20200617/28c17f9cea4a8be99b2d94edc17f2032.jpghttps://uploads.tapatalk-cdn.com/20200617/5605a0da2f3f226f42ab3dcae037c596.jpghttps://uploads.tapatalk-cdn.com/20200617/fef7bfb5afa2a9dec951e8577a4845a5.jpg

It’s getting there slowly but Shirley

https://uploads.tapatalk-cdn.com/20200617/1193cbbc0904ab812a38db34e00c3132.jpg


Sent from my iPhone using Tapatalk

[2manymustangs]

Looking good!

Did yall do the epoxy floor work yourself? Some of the effects on the epoxy floors are really spectacular :)

THanks for sharing...

I can't recall from the early photos, does the roof pitch in one direction OR is there a ridge line? I know that yall build differently in the west than on this side of the continental divide...

I'm looking at a 4/12 pitch truss roof, some attic trusses, some conventional and some Scissor trusses for a vault area (for a lift). 50x80 open/clear span with 2x6x12' frame walls.

My building site falls off about 6 foot from the s.e. corner to the n.w. corner so I'm looking at approximately 15K for a 8 foot tall concrete wall on three sides and then 6 feet of compacted limestone screening fill tapering off to nothing at the s.e. corner... I may even do a small cellar/basement area for well pressure tank/furnace/plumbing since we have freeze risks here...

70171

[2manymustangs]

Looking good!

Did yall do the epoxy floor work yourself? Some of the effects on the epoxy floors are really spectacular :)

THanks for sharing...

I can't recall from the early photos, does the roof pitch in one direction OR is there a ridge line? I know that yall build differently in the west than on this side of the continental divide...

I'm looking at a 4/12 pitch truss roof, some attic trusses, some conventional and some Scissor trusses for a vault area (for a lift). 50x80 open/clear span with 2x6x12' frame walls.

My building site falls off about 6 foot from the s.e. corner to the n.w. corner so I'm looking at approximately 15K for a 8 foot tall concrete wall on three sides and then 6 feet of compacted limestone screening fill tapering off to nothing at the s.e. corner... I may even do a small cellar/basement area for well pressure tank/furnace/plumbing since we have freeze risks here...

70171

70410

[RogerThat99]

Looks nice Bruce.

[2manymustangs]

Looks nice Bruce.

70430

[2manymustangs]

70431

[2manymustangs]

70432

[2manymustangs]

70433

[2manymustangs]

7043470434

[HB Vic]

Thats quite the office wow

[Wheeler]

Boogity Boogity! 70436
Hey y’all, can we see some finished photos of your new building?

I can’t recall if I saw the finished product.

What are he dimensions?

I ask because I’m ready to start on a 50x80 framed with 2x6x12’ walls.

Because of the grade change on my site , I’m going to have a poured 8’ wall on three sides.

Any pictures y’all can share?

[HB Vic]

Flick N Boogers. I love it lol