I have taken a strong liking to the Cloyes two piece timing covers, with the built in adjustable cam thrust adjustment. I think it's practically fool proof, and saves a bunch of time cutting down a thrust bumper for proper cam end play. The Cloyes cover does not include a front seal, so don't forget to buy one, and it should be carefully pressed into place. I use gasket cinch to help insure there are no leaks around the perimeter of the seal. I also care fully oil the thrust prior to bolting it onto the cover, and had previously oiled the thrust bearing behind the billet timing gear, as well as putting some oil on the chain and gears.