I can get some tomorrow. I took off about a dozen pieces of sheetmal that make sort of a jig saw puzzle so far. Even had to remove the spark plugs as they hold two pieces in. I have it down to the fan shroud which appears to have two bolts under the fan, which is more of a turbine as this is a wisconsin air cooled motor. Seems rather peculiar to have to remove the pulleys, belts and turbine to get this shroud off. I thought perhaps I could see them through the back tire hole , so removed the exhaust pipe and this big heavy half round shield in front of back tire. No luck. I also drilled a big hole in the top of the shroud to see if I could see the bolts, but it has an inner sheet metal contoured to the turbine. The shroud appears to be two pieces so I believe somehow it comes out.