SK-51 The trash of a lifetime.

[wannabe]

Just put up the bare bones of a build page for our new boat. Gonna be increasing here in the next few weeks. But - it is a start.
http://www.wannaberacing.com/sk51.html

[The Doctor]

I saw it with my own two eyes and I still cannot believe what I saw them create. Their talent must have come from their mother because I still get excited making clay snakes.

[HB Vic]

Wow that's an incredible transformation. More pics please


Sent from my iPhone using Tapatalk

[Mrs.K034]

Wow that's an incredible transformation. More pics please


Sent from my iPhone using Tapatalk

Man, you should have seen this thing, it is incredible what they did in such a short time!


Sent from my iPhone using Tapatalk

[2manymustangs]

"Other changes were implemented while Paul was away, so he couldn't say no. A driver cutout was created and installed for even more driver area."

As if you scrawny little twirps need any extra space...


Looks killer Buzz/Paul... Kudos...

Now send me those cam specs/cam timing specs... Please...

[wannabe]

[B][I][SIZE=4]
Now send me those cam specs/cam timing specs... Please...

Cam specs for this engine? You can have them. No secrets in this baby. Any 9:1, iron headed, hydraulic cammed 350 should make 482. If you really want them, you can have them. Heck, I will give you bottom notes, strut specs, rudder angles, turn fin profile, plate notes, or anything else you want. I have the prop digitized at Joeys place. I will let him make you a copy of it if you want.

[Mrs.K034]

Cam specs for this engine? You can have them. No secrets in this baby. Any 9:1, iron headed, hydraulic cammed 350 should make 482. If you really want them, you can have them. Heck, I will give you bottom notes, strut specs, rudder angles, turn fin profile, plate notes, or anything else you want. I have the prop digitized at Joeys place. I will let him make you a copy of it if you want.

Ha, this is so you! Love it. So humble, Buzz!


Sent from my iPhone using Tapatalk

[2manymustangs]

Cam specs for this engine? You can have them. No secrets in this baby. Any 9:1, iron headed, hydraulic cammed 350 should make 482. If you really want them, you can have them. Heck, I will give you bottom notes, strut specs, rudder angles, turn fin profile, plate notes, or anything else you want. I have the prop digitized at Joeys place. I will let him make you a copy of it if you want.

Can I get that with Grich's autograph on the write up?

ANY opinions you want to share on the cam/event timing/lsa and/OR bottom end clearances/dimensions are valued input... I learn by watching/listening...