Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Feb 2016
    Location
    Phoenix, AZ
    Posts
    2

    SOLD...Light Weight Boat Cover: Dust, Sun, Rain & Privacy cover for Eliminator Daytona's 26' - 27'

    SOLD...THANKS FOR LOOKING...SOLD
    Rain, Dust & Sun protection cover made out of coated polyester fabric combined with anti-wicking thread. Best of the Best, purchased this cover off another Prideful Eliminator Daytona owner whom had this cover custom made initially. I had the cover modified by professionals: Modification includes, tie down system with sheep skin protection, sheep skin protection on rear corners and center mass rain poll drain system. You can use this cover while boat is in storage, at the slip, or on the beach for a rain and dust/sun or as a privacy cover. The cover can be tied down to the boat while off the trailer and in the water.
    (This cover is NOT recommended for towing.)

    Cover will fit multiple Eliminator Daytona boat models ranging in size from the 26' to the 27' model's and years 2001 through 2017.

    Cover is built to fit the following models:
    26' ICC Daytona. 27' Speedster. 27' ICC Daytona. 27' Standard deck.
    Cover will fit the following years: 2001 to 2017.

    (rain pole included.)

    Photo is shown of cover on a 2012 27' Eliminator Speedster.

    $800.00
    Sorry Photos are sideways... could not get them edited or rotated:
    Name:  IMG_4368.jpg
Views: 101
Size:  77.2 KBName:  IMG_4364.jpg
Views: 72
Size:  69.9 KBName:  IMG_4366.jpg
Views: 95
Size:  64.7 KBName:  IMG_4365.jpg
Views: 100
Size:  74.9 KBName:  IMG_4367.jpg
Views: 97
Size:  64.7 KBName:  IMG_4370.jpg
Views: 100
Size:  66.9 KBName:  IMG_4369.jpg
Views: 111
Size:  50.3 KBName:  IMG_4361.jpg
Views: 95
Size:  104.7 KBName:  IMG_4360.jpg
Views: 95
Size:  96.6 KBName:  IMG_4362.jpg
Views: 113
Size:  58.5 KB

    $800.00
    Last edited by EL Guapo; 09-25-2016 at 05:41 AM.

  2. #2
    Do you know who made this? i need one for my boat and can't find anybody that make them.

  3. #3
    Junior Member
    Join Date
    Feb 2016
    Location
    Phoenix, AZ
    Posts
    2
    No, I am not sure of the original maker of the cover. I purchased it off another Eliminator guy who told me he had over $1,000 in having it custom made. If you have a 26' or 27' Eliminator Daytona this will work perfect for it.
    Last edited by EL Guapo; 09-25-2016 at 05:40 AM.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •