Results 1 to 4 of 4
  1. #1

    Parting out BBC 454

    Hey guys Im new here but I frequent Performance Boats. I destroyed a piston and have decided to part out the motor and buy a running boat. Will also be posting the boat with pump soon. Let me know if there are any parts that you might be interested in.
    All parts are off of a 454
    All parts are plus shipping or the ride
    GM 454 Heads -- cast# 336781 – Fresh valve job only 10 minutes of run time (one valve possibly hit but no visible damage) - $325
    Cal Custom Valve Covers – part # 40-2100 - $80
    Crane cam Fireball 300C - $70
    AC Delco single wire marine alternator - $80
    Alternator Mount (hot rod mount- low/side mount) - $50
    1310 Spicer Driveline and PTO from JetBoatPerformance $ - 90
    Nicson BBC Motor Plates - $120
    Complete stainless braided plumbing system - $100
    Stainless braided fuel line setup for dual carb system - $55
    Bassett T valve - $ 40
    2 Edelbrock 1407 Preformer carburetors (freshly rebuilt-only 10 minutes of run time on both) $150/Each $250/both
    Edelbrock TR 2X dual carb tunnel ram intake - $300
    WILL SELL BOTH CARB AND INTAKE TOGETHER OR SEPERATELY - $480 for complete intake
    Rewarder water injected OT headers - $400
    Finned scoop (I think Hilborn? style) - $60
    2 Air Filters - $30/ each
    Melling High Volume oil pump with stainless steel drive shaft/sleeve - $40
    Like new oil pressure sending unit - $20
    Not sure what its called – pulley for alternator belt that bolts to balancer - $20
    MSD Pro-Billit Distributor and MSD wires (only about 20 minutes of run time) – Part# 85551 - $200
    MSD High Vibration Blaster Coil (only about 20 minutes of run time) – Part# 8222 - $30
    Timing cover - $40
    Timing cover for cam driven water pump - $45
    New PowerMaster mini starter – Part# 9600 – 4.4:1 Gear reduction – up to 12:1 Compression (only been used for about 10 minutes) - $160

    Can send pics of individual parts if wanted.

    Contact Nathan - (916)337-1183 -- If I dont answer please leave a message or text me and I will get right back to you.
    Name:  photo 1.jpg
Views: 197
Size:  85.6 KBName:  photo 2.jpg
Views: 180
Size:  64.9 KBName:  photo 3.jpg
Views: 183
Size:  86.7 KBName:  photo 4.jpg
Views: 153
Size:  73.7 KBName:  photo 5.jpg
Views: 184
Size:  90.1 KBName:  photo 6.jpg
Views: 180
Size:  92.0 KBName:  photo 8.jpg
Views: 179
Size:  71.1 KBName:  photo 9.jpg
Views: 183
Size:  66.5 KBName:  photo 10.jpg
Views: 180
Size:  67.0 KBName:  photo 11.jpg
Views: 178
Size:  105.3 KBName:  photo 12.jpg
Views: 177
Size:  81.8 KB
    Attached Images Attached Images  
    Last edited by Monstertahiti78; 01-30-2014 at 04:23 PM.

  2. #2
    Welcome monster to www.hotboat.com! Good luck with the sale.

  3. #3
    Thank you. Hopefully I can get this all sold and start posting pics of my new boat on here.

  4. #4
    Junior Member
    Join Date
    Jul 2014
    Location
    Mountain Home ID
    Posts
    5
    Do you still have the 1310 Spicer Driveline and PTO from JetBoatPerformance $ - 90? Are you selling the oil pan? I am up in Idaho would you ship the parts?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •