Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Jet Fin

  1. #1
    Senior Member SBS933's Avatar
    Join Date
    Oct 2012
    Location
    Socialist Republic of California
    Posts
    1,278

    Jet Fin

    Anyone running one, Thinking about installing one. Is it worth it ?
    Believe 1/2 of what you see and nothing of what you hear.

  2. #2
    WESTERNAERO
    Guest
    I never thought so.

  3. #3
    On the pump, No
    Through hull turn fin, Yes

  4. #4
    Senior Member SBS933's Avatar
    Join Date
    Oct 2012
    Location
    Socialist Republic of California
    Posts
    1,278
    I never once thought, I need to get one. Hell with it, I guess I don't.
    Believe 1/2 of what you see and nothing of what you hear.

  5. #5
    You don't need it.


    Sent from my iPhone using Tapatalk

  6. #6
    I run one. My brother had a 19' dana and that boat would do a 360 if you pitched it hard, we installed the fins on the bottom of the boat and the one on the jet and fixed that problem.

  7. #7
    Senior Member SBS933's Avatar
    Join Date
    Oct 2012
    Location
    Socialist Republic of California
    Posts
    1,278
    I went ahead and installed one tonight, docks and trailers have to be easier with it.
    Believe 1/2 of what you see and nothing of what you hear.

  8. #8
    Makes a difference at low speeds�� not critical though

  9. #9
    Here in Alabama, after a hard rain there can be debris like logs floating and hidden just below the surface.
    Jet Fins (Rudder) and these do not mix well, especially at high speeds
    I would rather hear the ugly truth than be told a beautiful lie

  10. #10
    I put a rudder on my first boat. I was new to boating and new to jets. I really thought it would help with low speed. It did, I guess...but I still took it off.

    Then when I got my tunnel, I thought I'd need one. So I put the rudder I had left over on it. I took it off at the end of the day.


    Bottom line for me: they do make a difference, but it's not night and day. It was helpful when I was first learning - kind of like training wheels. Once I got "done" with the tunnel, I tried it again to test. It cost me 3 mph on the top end.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •