Results 1 to 4 of 4

Thread: 850/900 hp

  1. #1

    850/900 hp

    I am at the design stage of building a new engine for the Daytona.
    What would your build consist of. Money is an issue but do want good parts but not overkill. I will assemble the engine myself after all of the machining is done by a local shop I have used for over 20 years. I have built performance engines for 35 years.
    It will be natural aspirated, roller cam, tunnel ram? F.A.S.T.
    electronic fuel injection.
    What cubes - 598 or 632?
    Plan on using a tall deck block.
    I have dry exhaust so cam overlap is not an issue.
    Would you do the firing order swap?
    Thanks
    Steve

  2. #2
    So you're not worried about reversion, correct? No chance of it at all, ever?

  3. #3
    Hard to get reversion when your exhaust is dry to the tips of the two foot tails.

  4. #4
    I would go to offshoreonly.com there are alot of motors on there way over 1000hp good luck. buy it drop it in pull the rope.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •