Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19

    '94 Ultra Tunnel

    Hello, new guy here from Texas. This is my 1994 Ultra tunnel with a bbc 509 8-71 BDS blower, teauge superchiller, jet hot coated Basset headers, chrome plated 10qrt pan, timing cover, high torque starter, valve covers, puke tank, all polished AN fittings, etc etc. All engine work done this winter, only 6 hrs on engine. Had all the braces and transom plates re-powder coated while engine was out. Jet will be pulled this winter and gone through
    Attached Thumbnails Attached Thumbnails 598437_10152133990953219_1278296549_n.jpg   32628_10152046223113219_1824855825_n.jpg   995741_10152078460313219_1583682341_n.jpg   1174953_10152133991218219_1702177938_n.jpg   jetaway.jpg  

    newtrailerwboat4.jpg  

  2. #2
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19
    A few more. Trailer was also redone over winter break, paint, boards, carpet, lights.
    Attached Thumbnails Attached Thumbnails IMG_20130617_202147_960.jpg   IMG_20130617_202201_451.jpg   IMG_20130622_130206_176.jpg   IMG_20130708_165014_191.jpg   IMG_20130708_165033_551.jpg  

    IMG_20130708_165106_883.jpg   IMG_20130708_165220_391.jpg  

  3. #3
    Very Nice indeed Welcome to HB !

    AGGRESSORJETS.COM NEW ! JETBOATPERFORMANCE.BIZ 2.0 805 466 4719 jetboatinfo@gmail.com

  4. #4
    Beautiful boat JPT!! Where in Texas do you boat and what kind of speeds are you seeing?

  5. #5

    '94 Ultra Tunnel

    Sexy!!

  6. #6
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19
    Thanks guys. We usually either go to the Neches river thats here in my hometown or we'll go up to Sam Rayburn for the day or weekend. Have been to the San Jacinto a couple times and will go back because there's a group of guys that frequent the san jacinto. Also try and make some of the events when I can. With the rebuilt engine (new blower, carbs, etc etc) it'll run 85 on gps. Still want to pull the pump and get it built to match the new HP that the engine is making now.

  7. #7

    '94 Ultra Tunnel

    That thing is clean! How much HP do you think you are making?
    In the other thread you said the transom is different than the Placecraft but it sure looks the same to me.

  8. #8
    good looking ride.

  9. #9
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19
    Quote Originally Posted by Racer J View Post
    That thing is clean! How much HP do you think you are making?
    In the other thread you said the transom is different than the Placecraft but it sure looks the same to me.
    Engine dyno'ed at 798hp at 5800rpms

    As far as the transom of the two, the older placecrafts have a "box" like molded to the transom, like a southwind tunnel.


    But the newer placecrafts are like mine, flat transom with a "step" at the bottom
    Attached Thumbnails Attached Thumbnails placecraft3.jpg   placecraft2.jpg  

  10. #10

    '94 Ultra Tunnel

    Quote Originally Posted by JPT View Post
    Engine dyno'ed at 798hp at 5800rpms

    As far as the transom of the two, the older placecrafts have a "box" like molded to the transom, like a southwind tunnel.


    But the newer placecrafts are like mine, flat transom with a "step" at the bottom
    Yeah, I'm kinda familiar with the newer PC. Just curious, how much shoe you run and what kind.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •