-
Already miss the 310/562
Performance Engine Build...
When building a HIGH PERFORMANCE engine for your boat, be sure to have your machine shop set up the bottom end with .030" clearance on the main journals and .050" clearance on the rod journals if you want GREAT oil pressure and want your engine/lower end to live...
![Thumb](images/smilies/pb/thumb.gif)
Also, run a 1050 dominator with soft touch linkage on any engine from 289 inches up to 350 inches... and be sure to buy the biggest hydraulic roller cam your $$$ can buy, dont worry about stock heads, they will do just fine...
It will SCREAM...
-In a Republic, the sovereignty resides with the people themselves. In a Republic, the government is a servant of the people, and obliged to its owner, We the People..
"Remember, democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet that did not commit suicide." John Adams
-
Senior Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by 2manymustangs
When building a HIGH PERFORMANCE engine for your boat, be sure to have your machine shop set up the bottom end with .030" clearance on the main journals and .050" clearance on the rod journals if you want GREAT oil pressure and want your engine/lower end to live...
Also, run a 1050 dominator with soft touch linkage on any engine from 289 inches up to 350 inches... and be sure to buy the biggest hydraulic roller cam your $$$ can buy, dont worry about stock heads, they will do just fine...
It will SCREAM...
![Thumb](images/smilies/pb/thumb.gif)
Thank you for the Hotboat.com post. Welcome to the boards. You will soon find out your post, although perfectly related to what the site Hotboat.com "should" be about, will now move down the new post oblivion. Enjoy the Fireball thread during your stay here at Hotboat.com.
-
Senior Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by 2manymustangs
When building a HIGH PERFORMANCE engine for your boat, be sure to have your machine shop set up the bottom end with .030" clearance on the main journals and .050" clearance on the rod journals if you want GREAT oil pressure and want your engine/lower end to live...
Also, run a 1050 dominator with soft touch linkage on any engine from 289 inches up to 350 inches... and be sure to buy the biggest hydraulic roller cam your $$$ can buy, dont worry about stock heads, they will do just fine...
It will SCREAM...
![Thumb](images/smilies/pb/thumb.gif)
I'm building a 460 Ford with stock E7TE heads. Do you think this engine will work with well my Comp Cams Xtreme energy XR294HR? I'm thinking the Holley 2 barrel off my old 78 mustang should top things off perfectly too.
-
Member
Sure glad I didn't have advise from you guys when building my engine.
-
Senior Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by Sharp shooter
I'm building a 460 Ford with stock E7TE heads. Do you think this engine will work with well my Comp Cams Xtreme energy XR294HR? I'm thinking the Holley 2 barrel off my old 78 mustang should top things off perfectly too. ![Thumb](images/smilies/pb/thumb.gif)
Is that the same as a 3/4 race cam? If so it should work great!
-
Member
What's a 3/4 Race cam, only run 990 ft.?
-
Senior Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by hoofy
What's a 3/4 Race cam, only run 990 ft.?
Yep, custom grind for the new track layouts.
-
Senior Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by HotWater
Is that the same as a 3/4 race cam? If so it should work great!
It would've been back when that term was hot. lol
-
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by hoofy
What's a 3/4 Race cam, only run 990 ft.?
When you can't quite afford a full race cam.....
-
Member
![Quote](images/styles/gametime/misc/quote_icon.png) Originally Posted by CampbellCarl
When you can't quite afford a full race cam.....
Or when you only race 3 out of 4 nights......
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
All times are GMT -7. The time now is 09:18 AM.
vBulletin Skin By: PurevB.com
|
Bookmarks