Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: GT Performance

  1. #1

    GT Performance

    HOTBOAT.com is proud to provide you with a sneak peak in to one of the premier high
    performance marine shops around.

    We were honored to meet Gary Teague of GT Performance and his staff. However,
    it didn’t stop there; we had the opportunity to tour their top notch facility last week.
    Located on over 3.5 acres in Upland, CA, GT Performance has been a leader in the high
    performance marine industry for over 20 years. From full restorations to your basic full-
    service, GT Performance can provide with you excellent service for whatever it is you
    need.

    Gary began working for Future Marine building boats at the young age of 19, it was then
    he knew he was hooked. After Future Marine he was working solely for a guy on his
    toys, boats, etc. During that time Gary was building up his own clientele and decided it
    was time to go out on his own. In 1990 GT Performance was established.


    One of GT’s first build’s was Joe Mitchell’s “Coin To$$” out of Parker Dam, CA. He
    actually built the 1990 Hallett Vector for a gentleman by the name of Bob Stark and won
    4 national championships in a row. Several years and owner’s later, Joe Mitchell bought
    the boat and completely rebuilt it from the ground up. He then took it back to its original
    builder, GT, to re-rig and dyno tune the motor.

    Joe’s engine made over 1000 HP and over 1000 FT/LBS torque. Final tune was done
    in the GT Performance test pool, and it went straight back to Parker, its original home.
    The Vector can now be seen running up and down the Parker Strip. I must say, it is one
    of the most beautiful boats I have ever seen. The boat is flawless, from the gel to the
    rigging, it is all top notch.

    It has been a good couple of years for Gary and the crew at GT performance. After
    Greg Olson’s 33 Eliminator Daytona ran 173 MPH at Desert Storm in Lake Havasu,
    Az, they were destined to get more out of the boat. A few months later the boat ran a
    STAGGERING 192 MPH at the 2012 Lake of the Ozarks Shootout. GT and Greg Olson
    were crowned with the Top Gun Trophy for the event. His boat features twin 1,800-hp
    engines and an open canopy. 192 MPH in a 33 foot boat has to be one thrilling ride! At
    the same event GT also had the fastest single engine boat at 148 mph owned by Buck
    Stracener. A Nordic 2011 28ss Cat featuring a 572ci Imco. GT has really upped the
    game, it will be very interesting to see what they have in store for 2013.

    On top of building some of the fastest marine engines on the planet GT features a state
    of the art dyno testing room where they test and tune all engines they build. It just so
    happened that on this day they were working on one of their GT engines. For someone
    that has never witnessed an engine being dyno-tuned this is one of those unforgettable
    and “must” witness type of events for any motorsports enthusiast. [insert video]

    Also on-site is a test pool GT uses to run boats after rigging, tuning, etc. [insert test pool
    pic]

    Whether it’s rigging, servicing, tuning, upgrading, gel repair or upholstery GT
    Performance can take of your every need. The staff Gary employs are all top notch in
    their respective craft. This is very well evident in the nature of boats GT builds and works
    on. The photos don’t do this caliber of work justice. Stay tuned for what Gary has in store
    for 2013, for certainly there are bigger and better things to come! The amount of work
    they put in to each and every project is unreal. Gary also personally oversees every
    project and nothing leaves his shop without meeting his personal demands. GT is also
    now offering off-road engine packages, just another quality service brought to you by
    GT!

    Thank you to everyone over at GT Performance and especially Gary for letting us tour
    his facility.

    For more information contact GT Performance at :

    GT Performance
    2085 West 11th Street Upland, CA 91786
    Phone: 909-982-8391
    Attached Images Attached Images          

  2. #2

    GT Performance

    more Pics
    Attached Images Attached Images       

  3. #3
    WMC
    Guest
    Dyno Time At GT Performance.....

  4. #4
    WMC
    Guest
    Shop Tour

  5. #5
    Senior Member 270's Avatar
    Join Date
    Oct 2012
    Location
    AZ
    Posts
    549

    Excellent!

  6. #6

    GT Performance

    There was so much action at that place when we were there my head was spinning. Not to mention the aroma of brute horsepower in the air.

    I had to smoke a cig when we were done lol

  7. #7
    WMC
    Guest
    Quote Originally Posted by 270kid View Post
    Excellent!
    We are trying

  8. #8
    Senior Member Mitch's Avatar
    Join Date
    Oct 2012
    Location
    At the River
    Posts
    673
    Thank you for the compliments on our boat we werent expecting that ... very nice of you guys ....

  9. #9
    Here's one of the video's of the build.



  10. #10
    WMC
    Guest
    Quote Originally Posted by bilge rat View Post
    Here's one of the video's of the build.


    Bilge rate very impressive video, thank you for sharing!

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •