Does anyone have some pic's of how to do this?. Thank You!
Results 1 to 10 of 12
Thread: blower belt cover install
-
06-29-2017, 06:19 PM #1Junior Member
- Join Date
- Oct 2012
- Posts
- 14
blower belt cover install
-
06-29-2017, 08:59 PM #2Senior Member
- Join Date
- Dec 2012
- Posts
- 2,774
I might... have to look for some old pictures. Are you wondering what you'll need to do to mount it?
Originally Posted by dekman
Does anyone have some pic's of how to do this?
Sent from my iPhone using Tapatalk
-
07-19-2017, 06:47 PM #3Already miss the 310/562
- Join Date
- Sep 2013
- Location
- 314 ish....
- Posts
- 6,050
I would guess several standoffs coming off of your motor plate/blower and whatever else... HEY, that is a NICE bullet (from advanced)!!! The builders of the Farm Truck mill...
Check this one out...
Im guessing there are two on the bottom port side coming off of the motor plate also... I see two at the top that go to the blower case...
Last edited by 2manymustangs; 07-19-2017 at 06:59 PM.
-In a Republic, the sovereignty resides with the people themselves. In a Republic, the government is a servant of the people, and obliged to its owner, We the People..
"Remember, democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet that did not commit suicide." John Adams
-
07-22-2017, 07:34 PM #4Junior Member
- Join Date
- Oct 2012
- Posts
- 14
Thank You....that really helped!
-
07-23-2017, 05:18 PM #5Already miss the 310/562
- Join Date
- Sep 2013
- Location
- 314 ish....
- Posts
- 6,050
Tell us more about your mill and your hull if you don't mind sir...
More pics???-In a Republic, the sovereignty resides with the people themselves. In a Republic, the government is a servant of the people, and obliged to its owner, We the People..
"Remember, democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet that did not commit suicide." John Adams
-
11-23-2017, 04:28 PM #6Junior Member
- Join Date
- Oct 2012
- Posts
- 14
Well...It's a #3 Bob Palm 21' GN76 hull(Teague has #4) with a destroked 572(now 470)/1471 (20% underdriven) class legal motor. Just finished removing the trans/turning the motor and changing the fuel delivery with a new rear gas tank. Hopefully will keep running now for more than 2 laps! Testing this weekend....
-
11-23-2017, 08:49 PM #7Senior Member
- Join Date
- Oct 2012
- Posts
- 19,130
You guys in Parker this weekend??
Sent from my iPhone using Tapatalk
-
11-23-2017, 09:28 PM #8Junior Member
- Join Date
- Oct 2012
- Posts
- 14
Unable due to Family commitment......use a lake near my house.......
-
11-26-2017, 09:16 AM #9Senior Member
- Join Date
- Dec 2012
- Location
- SoCal- Fontana
- Posts
- 2,228
Bob, every time I see your boat it seems to be morphing more and more into a full tilt race boat.
Looks like you're having a lot of fun with it!
-
11-27-2017, 10:40 PM #10Junior Member
- Join Date
- Oct 2012
- Posts
- 14
Just copying the "Big Boys".... Ran a 10 lap qualifier last March and "The Boys" were kind enough to let me run on the outside.....too much fun...learned alot! Eric(GN24) lapped me....could not get her to turn. Just trying to get the "old girl" to corner better and need another 10mph on top. Turns much better now and got an old right hand prop from Heath.... Now if I could only find a "Real GN driver"......... Yes having a ton of fun!!!!!!
Reply With Quote
Bookmarks