Dimarco cruiser

[WESTERNAERO]

Yes, I want it. The interior looks bitchin in the pictures. What are you doing different?

Do you have any pictures of the throttle and down pedal assembly? Are you still up to making some of the stuff I need?

Everything looks bitchin in pictures, just like porn actress's.
I thought you were taking your boat to somebody already? But yeah, I can make doubles of some things. The only problem is some of the stuff can't just be popped off the machine. Anything mounted to stringers is going to be one off. When I get closer to really banging parts out I'll get a hold of you and we can talk about it.

[78Southwind]

Everything looks bitchin in pictures, just like porn actress's. Nice
I thought you were taking your boat to somebody already? I am just having them build the blast plate. But yeah, I can make doubles of some things. The only problem is some of the stuff can't just be popped off the machine. I just don't like the way the throttle and down pedal assembly is set up in my Spectra so I wanted to see how you are making yours Anything mounted to stringers is going to be one off. When I get closer to really banging parts out I'll get a hold of you and we can talk about it. Cool

Thanks...

[WMC]

Sweet

Sent from my XT907 using Tapatalk

[HB Vic]

Very nice work. Mastercam?

[WESTERNAERO]

Very nice work. Mastercam?

Matercam and Catia. But yeah Mastercam for this stuff.

[78Southwind]

How about some details on the engine.

Sent from my DROIDX using Tapatalk 2

[WESTERNAERO]

How about some details on the engine.

Sent from my DROIDX using Tapatalk 2

Yes it does need a detail, it's very dirty. Is that what you meant?
It's your typical 540.

[78Southwind]

Yes it does need a detail, it's very dirty. Is that what you meant?
It's your typical 540.

Don't be bashful. Give us the details!

Sent from my DROIDX using Tapatalk 2

[WESTERNAERO]

Don't be bashful. Give us the details!

Sent from my DROIDX using Tapatalk 2

I'm not sure what you'd like to know. I built it 6-7 years ago, I don't remember much unless I dig out all the old receipts. Don't remember the cam specs but it's a Crane hydraulic roller. Edelbrock Victor heads, CNC ported by Rich at West Coast Racing Cylinder heads don't remember valve size. Dart block, Crower light weight rods, Probe pistons, can't remember who's crank is in there. BDS 8-71 blower and comp manifold. Off the top of my head that's what it is.
Never had it dyno'd so no idea on numbers. It's way underdriven(notice the wagon wheel for a top pulley) to run cheap gas and it makes plenty of power for a cruiser.

[Sharp shooter]

It's way underdriven(notice the wagon wheel for a top pulley) to run cheap gas and it makes plenty of power for a cruiser.

This is a wagon wheel!

Looks great man!