The official hotboat.com "We get letters" thread

[RogerThat99]

The boat in your avatar looks a little wet what does it run about 50 ? tell me about your prop

Yes, tell us about your Stoker.

Sent using Tapatalk.

[WESTERNAERO]

Ok I got a few things for you and Marc to look at as well as some sketches. Im going to move my exhaust ports to the center and need a flush bezel for starters .

I'm thinking about doing the same thing. Might look a little funny on a blown deal though.
Marc's going to be there, you can give him the sketches if you want.

[Paul65K]

The boat in your avatar looks a little wet what does it run about 50 ? tell me about your prop

The only Schiada I ever had that ran 50 was only 10' long

It runs 81MPH on the GPS in perfect conditions, lightly loaded running a 26P 4 blade cleaver (Labbed) .....here's a video running high 70's with full fuel

[WESTERNAERO]

The only Schiada I ever had that ran 50 was only 10' long

It runs 81MPH on the GPS in perfect conditions, lightly loaded running a 26P 4 blade cleaver (Labbed) .....here's a video running high 70's with full fuel

Paul, is your boat a tunnel?

[Mitch]

I'm thinking about doing the same thing. Might look a little funny on a blown deal though.
Marc's going to be there, you can give him the sketches if you want.

It would look BadbAss Imco made me a template all i got to do is find it

[Mitch]

[QUOTE=Paul65K;98004]The only Schiada I ever had that ran 50 was only 10' long

It runs 81MPH on the GPS in perfect conditions, lightly loaded running a 26P 4 blade cleaver (Labbed) .....here's a video running high 70's with full fuel :

I was wondering if it was a Hill signature if its a cleaver probably not, you keep drinking that cool aide my friend .....

[Paul65K]

Paul, is your boat a tunnel?

Yes it is.....21RT with a setback motor mount......won't run with a Stoker as it's probably a good 500 - 800lbs heavier, but I'm guessing that I probably will be more comfortable in the chop.

I'm running a TorqueMaster lower so probably a couple of mph there but not really interested in going much faster personally

[Paul65K]

[QUOTE=Mitch;98007]

The only Schiada I ever had that ran 50 was only 10' long

It runs 81MPH on the GPS in perfect conditions, lightly loaded running a 26P 4 blade cleaver (Labbed) .....here's a video running high 70's with full fuel :

I was wondering if it was a Hill signature if its a cleaver probably not, you keep drinking that cool aide my friend .....

Kool-aid.....then I must have a defective GPS speedo......do you think I should return it

[WESTERNAERO]

It would look BadbAss Imco made me a template all i got to do is find it

Little mock up with my existing pipes. Not sure if I like it.

[Paul65K]

Oops....forgot the video......here we go