When I started this project the 300AAC ammo wasnt available in the stores and the load data was very very limited. It wasnt SAAMI approved until this past Spring I think...
I blew the gun up once with some of my initial loads...
It's just a science project...
Some lite reading:
http://300aacblackout.com/
Introducing the Advanced Armament Corp. 300 AAC Blackout (300BLK). This system was developed to launch 30 caliber projectiles from the AR platform without a reduction in magazine capacity and compatible with the standard bolt.
Full power 115-125 grain ammunition matches the ballistics of the 7.62x39mm AK, and eclipses 5.56mm with much higher-mass projectiles for a more dramatic effect on the target. Or choose subsonic cartridges for optimal use with a sound suppressor - 220 grain Sierra OTM (open-tip match) bullets vastly outperforms a 9mm MP5-SD in penetration and long range accuracy.
DESIGN OBJECTIVES
• Create a reliable compact 30-cal solution for the AR platform
• Utilize existing inventory magazines while retaining their full capacity
• Create the optimal platform for sound and flash suppressed fire
• Create compatible supersonic ammo that matches 7.62x39 ballistics
• Provide the ability to penetrate barriers with high-mass projectiles
• Provide all capabilities in a lightweight, durable, low recoiling package
REASONS 7.62x39 wAS NOT CONSIDERED
Extreme cartridge taper
• Reduces reliability of feeding in AR Magazines
• Reduces Magazine capacity
• Cartridge taper induces considerably higher bolt thrust-
exacerbating the AR Bolt's weaknesses
• Requires a larger Bolt Face which reduces Bolt Locking Lug strength-
exacerbating the AR Bolt's weaknesses
Limited projectile selection
• 0.311" diameter not a common option in most modern bullets
Bookmarks