Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 75

Thread: Locked & Loaded

  1. #21
    Quote Originally Posted by 2manymustangs View Post
    I built the gun, THEN changed the caliber a few times, THEN built the ammo... The 300AAC is kind of new on the scene...
    Built the ammo? Why not just buy it?


    Sent from my Bat Cave

  2. #22
    Already miss the 310/562 2manymustangs's Avatar
    Join Date
    Sep 2013
    Location
    314 ish....
    Posts
    6,050
    Quote Originally Posted by Eli View Post
    Built the ammo? Why not just buy it?

    Sent from my Bat Cave

    When I started this project the 300AAC ammo wasnt available in the stores and the load data was very very limited. It wasnt SAAMI approved until this past Spring I think...

    I blew the gun up once with some of my initial loads... It's just a science project...

    Some lite reading: http://300aacblackout.com/


    Introducing the Advanced Armament Corp. 300 AAC Blackout (300BLK). This system was developed to launch 30 caliber projectiles from the AR platform without a reduction in magazine capacity and compatible with the standard bolt.

    Full power 115-125 grain ammunition matches the ballistics of the 7.62x39mm AK, and eclipses 5.56mm with much higher-mass projectiles for a more dramatic effect on the target. Or choose subsonic cartridges for optimal use with a sound suppressor - 220 grain Sierra OTM (open-tip match) bullets vastly outperforms a 9mm MP5-SD in penetration and long range accuracy.


    DESIGN OBJECTIVES
    • Create a reliable compact 30-cal solution for the AR platform
    • Utilize existing inventory magazines while retaining their full capacity
    • Create the optimal platform for sound and flash suppressed fire
    • Create compatible supersonic ammo that matches 7.62x39 ballistics
    • Provide the ability to penetrate barriers with high-mass projectiles
    • Provide all capabilities in a lightweight, durable, low recoiling package

    REASONS 7.62x39 wAS NOT CONSIDERED
    Extreme cartridge taper
    • Reduces reliability of feeding in AR Magazines
    • Reduces Magazine capacity
    • Cartridge taper induces considerably higher bolt thrust-
    exacerbating the AR Bolt's weaknesses
    • Requires a larger Bolt Face which reduces Bolt Locking Lug strength-
    exacerbating the AR Bolt's weaknesses
    Limited projectile selection
    • 0.311" diameter not a common option in most modern bullets
    Last edited by 2manymustangs; 01-05-2014 at 08:32 PM.
    -In a Republic, the sovereignty resides with the people themselves. In a Republic, the government is a servant of the people, and obliged to its owner, We the People..

    "Remember, democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet that did not commit suicide." John Adams

  3. #23
    Quote Originally Posted by 2manymustangs View Post
    When I started this project the 300AAC ammo wasnt available in the stores and the load data was very very limited. It wasnt SAAMI approved until this past Spring I think...




    Some lite reading: http://300aacblackout.com/


    Introducing the Advanced Armament Corp. 300 AAC Blackout (300BLK). This system was developed to launch 30 caliber projectiles from the AR platform without a reduction in magazine capacity and compatible with the standard bolt.

    Full power 115-125 grain ammunition matches the ballistics of the 7.62x39mm AK, and eclipses 5.56mm with much higher-mass projectiles for a more dramatic effect on the target. Or choose subsonic cartridges for optimal use with a sound suppressor - 220 grain Sierra OTM (open-tip match) bullets vastly outperforms a 9mm MP5-SD in penetration and long range accuracy.


    DESIGN OBJECTIVES
    • Create a reliable compact 30-cal solution for the AR platform
    • Utilize existing inventory magazines while retaining their full capacity
    • Create the optimal platform for sound and flash suppressed fire
    • Create compatible supersonic ammo that matches 7.62x39 ballistics
    • Provide the ability to penetrate barriers with high-mass projectiles
    • Provide all capabilities in a lightweight, durable, low recoiling package

    REASONS 7.62x39 wAS NOT CONSIDERED
    Extreme cartridge taper
    • Reduces reliability of feeding in AR Magazines
    • Reduces Magazine capacity
    • Cartridge taper induces considerably higher bolt thrust-
    exacerbating the AR Bolt's weaknesses
    • Requires a larger Bolt Face which reduces Bolt Locking Lug strength-
    exacerbating the AR Bolt's weaknesses
    Limited projectile selection
    • 0.311" diameter not a common option in most modern bullets
    This is soooo far over my head...just don't test me...please


    Sent from my Bat Cave

  4. #24
    Quote Originally Posted by 2manymustangs View Post
    When I started this project the 300AAC ammo wasnt available in the stores and the load data was very very limited. It wasnt SAAMI approved until this past Spring I think...

    I blew the gun up once with some of my initial loads... It's just a science project...

    Some lite reading: http://300aacblackout.com/


    Introducing the Advanced Armament Corp. 300 AAC Blackout (300BLK). This system was developed to launch 30 caliber projectiles from the AR platform without a reduction in magazine capacity and compatible with the standard bolt.

    Full power 115-125 grain ammunition matches the ballistics of the 7.62x39mm AK, and eclipses 5.56mm with much higher-mass projectiles for a more dramatic effect on the target. Or choose subsonic cartridges for optimal use with a sound suppressor - 220 grain Sierra OTM (open-tip match) bullets vastly outperforms a 9mm MP5-SD in penetration and long range accuracy.


    DESIGN OBJECTIVES
    • Create a reliable compact 30-cal solution for the AR platform
    • Utilize existing inventory magazines while retaining their full capacity
    • Create the optimal platform for sound and flash suppressed fire
    • Create compatible supersonic ammo that matches 7.62x39 ballistics
    • Provide the ability to penetrate barriers with high-mass projectiles
    • Provide all capabilities in a lightweight, durable, low recoiling package

    REASONS 7.62x39 wAS NOT CONSIDERED
    Extreme cartridge taper
    • Reduces reliability of feeding in AR Magazines
    • Reduces Magazine capacity
    • Cartridge taper induces considerably higher bolt thrust-
    exacerbating the AR Bolt's weaknesses
    • Requires a larger Bolt Face which reduces Bolt Locking Lug strength-
    exacerbating the AR Bolt's weaknesses
    Limited projectile selection
    • 0.311" diameter not a common option in most modern bullets
    Cool stuff but I hate hard to find ammo stuff. I'll just stick with easy to get .556.


    Or this for my Big Bang fix.

  5. #25
    Senior Member Paul65K's Avatar
    Join Date
    May 2013
    Location
    Lake Havasu City/Havasu Palms
    Posts
    3,998
    Quote Originally Posted by djunkie View Post
    Cool stuff but I hate hard to find ammo stuff. I'll just stick with easy to get .556.


    Or this for my Big Bang fix.
    Hey Dave,

    I know this is like asking "How high is up" but....................how much would you think it would cost me to build a rather standard run of the mill 5.56 AR? With some of the more desirable options not just "plain Jane" mil-spec??

    Been thinking of building one but the local guys have a Colt for $850 and was wondering if I should go with that or build.......whatdoyathink??

  6. #26
    Already miss the 310/562 2manymustangs's Avatar
    Join Date
    Sep 2013
    Location
    314 ish....
    Posts
    6,050
    I just crank out my own 300BLK now, its a great round for deer hunting... I purchased about 5000 pieces of brass from Brad's Warehouse... I crank out 200 or so when I get bored on conference bridges for work...

    I REALLLLLY like the AR10s in 7.62 NATO, bad mofos... VERY nice piece there DJ...

    I do have several set up for 5.56 NATO...

    My two faves, an A1 replica that has original light barrel and all original furnature/sling/bipod
    Name:  DSCN0864.jpg
Views: 1790
Size:  55.1 KB
    You probably know who this Armalite came from but I will keep it a secret... as promised...
    Name:  armalite.jpg
Views: 1895
Size:  75.5 KB
    Last edited by 2manymustangs; 01-05-2014 at 08:55 PM.
    -In a Republic, the sovereignty resides with the people themselves. In a Republic, the government is a servant of the people, and obliged to its owner, We the People..

    "Remember, democracy never lasts long. It soon wastes, exhausts, and murders itself. There never was a democracy yet that did not commit suicide." John Adams

  7. #27
    This thread turned into gun porn! Love it!


    Sent from my Bat Cave

  8. #28
    Quote Originally Posted by 2manymustangs View Post
    I just crank out my own 300BLK now, its a great round for deer hunting... I purchased about 5000 pieces of brass from Brad's Warehouse... I crank out 200 or so when I get bored on conference bridges for work...

    I REALLLLLY like the AR10s in 7.62 NATO, bad mofos... VERY nice piece there DJ...

    I do have several set up for 5.56 NATO...

    My two faves, an A1 replica that has original light barrel and all original furnature/sling/bipod
    Name:  DSCN0864.jpg
Views: 1790
Size:  55.1 KB
    You probably know who this Armalite came from but I will keep it a secret... as promised...
    Name:  armalite.jpg
Views: 1895
Size:  75.5 KB
    I put one together for my dad with an old colt upper like that one above. Triangle handguards and all. But I put a collapsible stock on it just cause I had one laying around. It's in the pics that Eli posted. It's got an original colt 3x scope on that carry handle too. Cool piece that shoots pretty well.

  9. #29
    Quote Originally Posted by djunkie View Post
    I put one together for my dad with an old colt upper like that one above. Triangle handguards and all. But I put a collapsible stock on it just cause I had one laying around. It's in the pics that Eli posted. It's got an original colt 3x scope on that carry handle too. Cool piece that shoots pretty well.







    Sent from my Bat Cave

  10. #30
    Quote Originally Posted by Paul65K View Post
    Hey Dave,

    I know this is like asking "How high is up" but....................how much would you think it would cost me to build a rather standard run of the mill 5.56 AR? With some of the more desirable options not just "plain Jane" mil-spec??

    Been thinking of building one but the local guys have a Colt for $850 and was wondering if I should go with that or build.......whatdoyathink??
    Unless you want to have a different stock or different type of handguards I'd just buy that Colt. That's not a bad deal. I could probably build you one for a little cheaper but it won't be a Colt. Now if you want it like mine with the longer handguard, magpul stock, custom trigger etc, it's probably better to build one.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •