Quote Originally Posted by Stainless View Post
Like a triangular gusset and plate welded on the inside of the vertical members? That would work too. It might restrict the trolley's travel all the way to out side if needed. I will look at this idea too, might be easier. Thanks!


CH3NO2
It wouldn't restrict it any more than the current width.

I would do that just so I can slide my Schiada trailer in there since the guides are welded onto the trailer and stick out farther than the fenders. I figure I need 104" to get my boat in. So 108" leaves me with a few inches on each side.

I would weld the plate on top and then gusset the plate to the post just so I don't pucker up when I need to lift a boat off the trailer