so.... found the answer.... some one at hallett put bravo3 spacers in the trim rams... one side the spacers were broken. so that side tucked down farther.. .the bravo 3 spacers stop the drives from getting neg. trim...now both drives will tuck in for getting on plane way better... I put 1.5 drive spaces in the lower units....might work better ... might not... might cause a porpoise problem...
but in thinking it will make it better ... so we will see.. the boat ghost rides across 2' chop @ 50 mph as it was,... so if anything goes to the neg side I will know and can take them back out..