Found a crack in the bottom so the hull was strengthened added glass and intake reset.


At some point in the process I dowelled what seemed like 500 holes in one of the stringers. I think this was the result of a poorly designed bracket. It was holding the water separator, tank switch and fuel pump. I believe the screws kept pulling out. Through the years previous owners just moved over a bit and drilled new holes. Thankfully good wood came out of all of the holes when I drilled them out and they are now fixed. There was also an odd series of small holes on the top of the tunnels. They went all the way through the bottom on the starboard side. Not so on the port side. All have been filled.