New boat

[Rock_Bottom]

Nothing it's sounds good. But I know running with the timing off can ruin a motor. Ya b&j marine, there super cool been getting all my parts threw them.


Sent from my iPhone using Tapatalk

[2manymustangs]

Nothing it's sounds good. But I know running with the timing off can ruin a motor. Ya b&j marine, there super cool been getting all my parts threw them.


Sent from my iPhone using Tapatalk

Call Ron Hill or his son, at Signature props (around Orange), they can prolly send you to one of the COR guys that is close to you or walk you through it... They drink 2 cycle oil for breakfast instead of coffee If you can talk to Ron, tell him that Bruce/2mm sent you, they should be able to talk you through it over the phone... Did you mark the dizz and parts before you took it apart to get it back CLOSE to the original position, if yes, you are prolly fine to run it until you can get it timed accurately, just not WOT... Run it and look at the plugs, a hard pull and then looking at a plug should tell you if your about to melt down OR NOT... Not very scientific but its a starting point...

Do you have a timing light??? This should get you real close...