Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    May 2014
    Location
    Fort Worth, Texas
    Posts
    2

    79 CVX 20 jet restored videos and specs



    Runs 72 mph GPS @4900 rpm AA impeller

    460 BBF Parts and machining list

    Harmon long bolt logs port matched and outlets enlarged from 2 7/8” to 3.5” with new 4” tips
    Performer RPM Intake port matchedXM278H K34-241-5 CompCams Kit http://www.compcams.com/Cam_Specs/Ca...csid=1002&sb=2
    Drilled block oil drain back holes from 1/2" to 9/16" and added one.
    1 pair of C8VEE heads CNC ported by Red Man
    One set of Ferrea 1.76 exh valves
    One set of Ferrea 2.19 intake valves
    One set of exhaust seats
    ARP Guide plates
    ARP 7/16 studs
    Roller rockers BB FORD PROCOMP T6 ALUMINUM ROLLER ROCKERS 351C 429 460 Smith Bros, Restricted 3/8” push rods)
    Ford Racing Tall valve covers
    VC cover stud kit ARP 400-7614 stainless 12 point
    Arp intake bolts
    Stock crank 10/10
    All bearings Clevite
    Armondo 10 Qt. oil pan
    Mellings HV oil pump
    ARP HP oil pump shaft
    New dizzy gear and pin
    ARP rod studs with truck rods
    Ford truck rods D6VE-AA
    sealed power hyperutectic .040 over pistons 22cc
    Block bored .040 over stock /decked .029"
    Oil drain back holes added or enlarged
    Dizzy gear oil modification
    ARP HP oil pump drive shaft
    New Holley 850CFM double pump w/ Non-metallic Carb spacer w/ studs
    "Marine" engine gasket set*from Jet boat Performance (does not seem different from stock except for repackaging by marine parts company).
    Timing cover gasket set w/ seal
    new headbolts and ARP main studs
    Berkeley 12JE pump
    I rebuilt it completely with new American Turbine aluminum AA impeller set at ..022”
    turns AA impeller 4900 RPM at 72 mph gps

    New Teleflex gauges 80 mph and 7000 rpm tach
    New instrument panel for larger guages
    http://www.overtons.com/modperl/prod...te&merchID=400

    Place diverter with push button control .
    Last edited by 79cvx20; 05-25-2014 at 12:30 PM.

  2. #2
    Thanks for sharing! And welcome to the site BTW.

  3. #3
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228
    Pretty cool! Looks like a fun boat.

  4. #4
    Back and forth

    Sent from my SCH-I435 using Tapatalk

  5. #5
    Great video and even better first post! Welcome!


    Sent from my Bat Cave

  6. #6
    Another mysterious missing post?

  7. #7
    Quote Originally Posted by gn7 View Post
    Another mysterious missing post?
    I'm not seeing any missing posts here? OP edited his og post today if that's what you're talking about?

  8. #8
    Quote Originally Posted by GotHalos View Post
    I'm not seeing any missing posts here? OP edited his og post today if that's what you're talking about?
    OH. Like clean off the thread? TODAY?? I don't remember seeing anything YESTERDAY when I posted. Who was the OP. I take there was a video at one time. Kind of a use thread now.

  9. #9
    Quote Originally Posted by gn7 View Post
    OH. Like clean off the thread? TODAY?? I don't remember seeing anything YESTERDAY when I posted. Who was the OP. I take there was a video at one time. Kind of a use thread now.

    Thanks for bringing attention to this.

    He edited his original post that included 'links' so it was automatically moderated again. Because he has less than 5 posts and posted a link it gets auto moderated until approved because of the anti-spamware.

    All is well now.

  10. #10
    Quote Originally Posted by GotHalos View Post
    Thanks for bringing attention to this.

    He edited his original post that included 'links' so it was automatically moderated again. Because he has less than 5 posts and posted a link it gets auto moderated until approved because of the anti-spamware.

    All is well now.
    I was pretty sure admin was up to their typical bullshit.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •