After the epoxy cured I started finish sanding in preparation for flow coating, I decided that I should start fabbing the new hardware before the final flow coat so I wouldn't have to worry about scratching it.
[ATTACH=CONFIG]
As you can see, everything is going to be new.
Results 1 to 10 of 113
Thread: A 76 Hondo GT comes home
Threaded View
-
05-13-2014, 11:57 AM #5Member
- Join Date
- May 2014
- Posts
- 69
Last edited by OhHondoGT; 05-13-2014 at 02:17 PM.
Reply With Quote
Bookmarks