Quote Originally Posted by GRADS View Post
I have no idea what a pop rivet is but I'm open to all ideas. Using a longer screw to grab the other side of the channel won't work because the other side is the glass. Not sure if that piece comes off but I guess I need to look into that. What are your thoughts on welding either the holes closed and tapping them or just even welding the thing to the frame?
I’m no expert but I’m assuming that the frame is aluminum and the bracket is stainless. Not good welding partners. If you’re going to weld up the frame The glass is coming out anyway. FWIW you might want to check the other side...