Results 1 to 10 of 13

Thread: 1994 Ultra

Hybrid View

  1. #1
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19

    1994 Ultra

    Boat is a 1994 Ultra tunnel, original paint in great condition. Original setup/rigging from Tom Papp. Has two polished 12gal saddle tanks (pulled and cleaned out Feb. '13). New steering cable and new Gaffrig GPS speedo with recall in 2012. Kill switch. Custom trailerable cockpit cover. Polished fire extinguisher. Fiberglass seats. All gauges are Gaffrig: speedo, tach, boost, oil psi, water temp, hour meter, oil temp., all with anodized bezels. Anodized battery tray with Optima red top battery. Splash gaurd on transom. 3 bilge pumps. Solid floors and stringers.

    Winter of 2012-Spring of 2013 pulled engine out of the boat for a rebuild. Originally powered by stock 502 with 6-71 wieand blower. Had KPE (KPE Racing) do the rebuild. 502BBC bored .030" over to 509ci, BDS 8-71 blower, Teague super chiller, Manley H-beam rods, SRP blower pistons, Clevite Hell fire file fit rings, Comp cams hydraulic roller cam, Manley severe duty marine valves-dual springs-retainers-locks, MSD billet distributor, MSD high vibration coil, Moroso ultra wires, ATI balancer, Miziere Billet Flexplate, chrome timing cover, chrome plated 10qrt pan, chrome coil mount, new puke tank, valve covers w/ male -12an welded on, Dooley air scoop, and JET HOT coated Bassett twistie headers. Dyno'd 794hp at 5800rpm, 16% under driven w/ 4.6lbs boost. New chrome 1-wire alternator, chrome high torque starter, custom polished oil filter with cleanable element. All AN fittings are new polished fittings with new ss hoses. 12hrs run time since rebuild. youtube video >>> 509bbc 8-71bds - YouTube

    While engine was out I pulled the old carpet out of the boat and cleaned up the floor. Had all the pieces aluminum pieces anodized to match, installed new anodized fuel fills, and went back with all new polished fasteners. Installed oil temp and hourmeter gauges. Installed new anodized overboard dumps (2 for eng, 1 for cooler, 1 for bilge)

    Berkley pump with droop, hyd diverter, billet inducer, jet-away rachet, loader, and ride plate. Not sure what cut the impeller is, a pump rebuild was next on the list but haven't done it yet. Works fine the way it is.

    Trailer also redone late 2012 with new paint, new led lighting, new boards, new carpet and new winch. Front of fenders are sprayed with rock/chip gaurd. Also has spare mounted on trailer.
    Have receipts for all engine work, polishing/anodizing/chroming/coating. Great turn key 85-90mph boat. $20,000 OBO
    Message me or email me at Toolyea@yahoo.com Located in Vidor, tx
    Thanks
    Attached Images Attached Images              
    Last edited by JPT; 01-13-2014 at 10:13 AM.

  2. #2
    Senior Member niceguyeddie's Avatar
    Join Date
    Oct 2012
    Location
    Costa Mesa, CA
    Posts
    1,483
    You have a beautiful Ultra!

    Interesting trailer design. At one time was that a dolly trailer that got converted to a road trailer?

  3. #3
    Straight up beautiful boat...

    I am pretty sure she's got more in her with 800 ponies.

    http://www.ebay.com/itm/1994-Ultra-j...wer_Motorboats

    Last edited by 78Southwind; 12-26-2013 at 08:39 PM.

  4. #4
    Senior Member niceguyeddie's Avatar
    Join Date
    Oct 2012
    Location
    Costa Mesa, CA
    Posts
    1,483
    Quote Originally Posted by 78Southwind View Post
    Straight up beautiful boat...

    I am pretty sure she's got more in her with 800 ponies.

    http://www.ebay.com/itm/1994-Ultra-j...wer_Motorboats

    Sounds good. Pretty ballsy to not have a belt guard on that thing!

  5. #5
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19
    Thanks for the compliments guys. I thought about putting a guard on but never found one I liked. Not sure about the trailer, it was setup as a road trailer when I bought it.
    Last edited by JPT; 12-28-2013 at 07:22 PM.

  6. #6
    Junior Member
    Join Date
    Sep 2013
    Location
    SE Tx
    Posts
    19
    TTT anyone interested feel free to contact me with any questions

  7. #7
    Is boat still availible

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •