Page 1 of 7 123 ... LastLast
Results 1 to 10 of 96

Hybrid View

  1. #1
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228

    Chevelle Engine Swap

    I'm hoping to do this in the next few weeks. I yanked off all the exhaust today and I'll likely yank the old 396 out next weekend. Stay tuned!!!


  2. #2
    What's going in its place???

  3. #3
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228
    60 over 454 with the Edelbrock Performance package. Nothing fancy, but should be enough to at least run with the new mustangs, Camaros and Challengers (I hope).

    I've got new 1 7/8"th Patriot Headers, a Coan 3000 stall convertor and a Griffin Radiator going in with it. I'll be using my John Avery 850 dp and air gap manifold and I've got some stock appearing (taller) valve covers that I'll be using instead of those pictured. Engine will be all chevy orange (probably next weekend) aside from the intake, cam cover, dampner and my fancy chrome looking Edelbrock water pump that I already have.


  4. #4
    Wow that's gonna be nice. What about the tranny?

  5. #5
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228
    Quote Originally Posted by Hotboat View Post
    Wow that's gonna be nice. What about the tranny?
    The trans is a turbo 400. I'm gonna leave it as is for now and go through it later also adding a gear vendors overdrive to it at that time.

  6. #6
    Quote Originally Posted by Sharp shooter View Post
    The trans is a turbo 400. I'm gonna leave it as is for now and go through it later also adding a gear vendors overdrive to it at that time.
    Yeah that's what mine needs too

    That things gonna be a beast 🏼

  7. #7
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228
    Quote Originally Posted by Hotboat View Post
    Yeah that's what mine needs too

    That things gonna be a beast ��
    I thought yours was a 4 speed?

    Beast no not really, but it will wake it up quite a bit. What's the parts list for your engine? Heads, Cam, compression, carb intake etc....?

  8. #8
    Quote Originally Posted by Sharp shooter View Post
    I thought yours was a 4 speed?

    Beast no not really, but it will wake it up quite a bit. What's the parts list for your engine? Heads, Cam, compression, carb intake etc....?
    It is but you can always use another gear lol

    Mine is pretty much stock but 30 over. Heads were done and it has a mild cam. I think the carb is a Rodchester with holly intake

  9. #9
    Nice, Jerry!!!


    Sent from my iPhone using Tapatalk

  10. #10
    Senior Member Sharp shooter's Avatar
    Join Date
    Dec 2012
    Location
    SoCal- Fontana
    Posts
    2,228
    Quote Originally Posted by Mrs.K034 View Post
    Nice, Jerry!!!


    Sent from my iPhone using Tapatalk
    Thanks.

    Just need to swap intakes for the air gap and put it in.



    These black valve covers won't clear the brake booster so had to go with stock appearing but tall valve covers.




 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •