Need a mid season replacement so you don't lose the rest of the summer?

This belongs to a friend who brought it to me to check out. The engine didn't have much time on it, but apparently floats stuck and washed the cylinders down, so it will get honed, new rings and bearings. He wants something larger while it's out of the boat, so will sell either the short block, or complete with Edelbrock Performer RPM oval port heads.

Specs as follows:

2 bolt block, 4.310" bore
cast crank, std/std
3/8" rods that had been resized with new ARP bolts at the previous rebuild
TRW forged pistons, small dome, pump gas compression
Clay Smith HR 284 hydraulic roller cam (can get it reground if you want something different to work with your application)
Cloyes timing set
New Clevite "P" rod and main bearings
New Moly filled ring set.
New rear main seal
GM damper

Bearing clearances will be checked and short block assembled by myself. $2000

Edelbrock Performer RPM oval port heads $1500

Also could be sold as a complete engine if someone was interested, PM for phone number to discuss.

Located in Southern California