View Poll Results: Vote for Hot Boat Decemeber

Voters
46. You may not vote on this poll
  • 12 26.09%
  • 2 4.35%
  • 6 13.04%
  • 0 0%
  • 1 2.17%
  • 18 39.13%
  • 4 8.70%
  • 3 6.52%
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 49
  1. #1

    HotBoat of the Month December 2013- SUBMIT HERE (26' and Under)

    26' and under for this month folks. Please submit here.

  2. #2
    Name:  2011-05-21_15-39-48_472.jpg
Views: 2393
Size:  58.2 KBName:  2011-05-21_10-42-27_543.jpg
Views: 2409
Size:  68.1 KBName:  1009787_543145245732662_976456851_n.jpg
Views: 2476
Size:  102.1 KB
    My 04 21' Eliminator Daytona. My wife and flew down to eliminator to design the gel and discuss options. In May of 04, the boat was ready. I had Tom Papp's shop install the polished Aggressor Jet and Intake. The boat rides on a 02 Extreme trailer. I picked the boat up and got it home on Mother's day, 04. My wife claims the boat as her Mother's day present for that year. When I got the boat home, it had the interior, jet and motor plates installed.

    I purchased a short block from a shop in Seattle. Dart block, Scat crank and h-beam rods, Je dished pistons neutral balanced. I also purchased the AFR 345 with 122cc CNC chambers from the same shop. compression ratio is about 8.25:1. The rest of the motor includes .630ish lift cam, all roller valve train with stud AFR girdles, HV oil pump, DBL roller timing chain, 2 piece timing cover, polished BDS 871 blower and intake, Lightning thru transom headers, Crane ignition, Demon 850 blower carbs, BG fuel pump and filter.

    For tunes there is a Pioneer headunit, JL amps and 4 6.5" Infinity separate speakers and a 12" sub.

    When I got the boat home, it had the interior, jet and motor plates installed. My oldest son and I wired the boat, assembled the long block and did the rest of the installs. We have only had minor issues with the boat since new. We are out at some lake (usually Saguaro in Phoenix) 3-4 weekends a month in the summer.

    Hope you like the pictures.
    Last edited by cruzer; 10-19-2013 at 09:36 AM.

  3. #3
    Here are a couple of videos taken by a friend of my 04 21' Eliminator Daytona:

    From the no wake zone on Saguaro to the main lake. Action starts at about 1:58


    This one gets windy after the camera boat takes off. There isn't much to see after that.


    Credit for the videos goes to Hot Boat member and my good friend, Cave. Hopefully you enjoyed the videos.
    Last edited by cruzer; 10-03-2013 at 04:53 PM.

  4. #4
    Pictures didn't work...

  5. #5
    Should work now...

  6. #6
    1995 Liberator 21'

    Currently powered by an all aluminum LS1 383 with EFI. Dominator pump with all the goodies. Runs a little over 80 mph.






    And some for fun:





    Last edited by FormulaZR; 10-17-2013 at 11:37 PM.

  7. #7
    2013 Crackerbox

    -Tom Patterson Hull

    -Complete M&D Performance SBC w/ Buick heads pumping out insanse HP with a limitied 314CI restriction

    -DG Stainless Exhaust

    -We race around the country with the Lucas Oil Drag Racing Series
    Attached Images Attached Images      

  8. #8
    Senior Member hbchgirl's Avatar
    Join Date
    Jan 2013
    Location
    Huntington Beach, CA; Parker, AZ
    Posts
    1,191
    Quote Originally Posted by rivergames View Post
    2013 Crackerbox

    -Tom Patterson Hull

    -Complete M&D Performance SBC w/ Buick heads pumping out insanse HP with a limitied 314CI restriction

    -DG Stainless Exhaust

    -We race around the country with the Lucas Oil Drag Racing Series
    Nice!!! Not everyone has one of these!

  9. #9
    Wendi
    Guest
    7 more spots left. Let's see your "Hotboats"!!!

  10. #10
    Wendi
    Guest
    Bump get your entries in....

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •