1979 Beachcomber Rebel BBC jet boat for sale

[bluubyu]

For Sale $9,500.00

1979 Beachcomber Jet Boat

Boat
Built for a family of skiers, this is an all fiberglass hull with ski storage and newer seats. All parts listed below are new: Marine grade wiring with starter fuse, main fuse and separate circuits at front of boat are fused individually, switches, battery, helm and steering cable, pitot tube and plumbing for speedometer, starter switch, hour meter, lighted compass, horn and switch, fire-extinguisher, glove box, DC power port, steering wheel, lights, bilge pump, carpet,

Engine
Only 67 hours on 454 Chevrolet (std. bore and stroke) with open-chambered oval port LS3 heads and Fel-Pro MLS gaskets, Edelbrock Performer RPM Air-Gap intake, MSD pro-billet distributer and coil, Demon 750CFM vacuum secondary marine carburetor, K&N marine flame-arrester/air filter, Comp Cams CB XM 270H-12 camshaft, Comp Cams dual valve springs/locks/retainers, Speed-Pro hypereutectic pistons and floating pins (9.5:1 compression with 117cc heads), , chromoly rings, Eagle I-Beam connecting rods, Clevite bearings, complete ARP stud and fastener kit for reciprocating assembly and heads, GM 7/16 pushrods, Crane roller rocker arms, Cloyes double-roller timing set, Melling HV oil pump, Holley 110GPH mechanical fuel pump, all fuel line is stainless braid with stainless AN fittings, water hoses and clamps, 7qt baffled oil pan with Fel-Pro one-piece gasket, all (except intake) fasteners are stainless socket head on engine and pump. Hardin Marine exhaust logs with new fittings, stainless clamps, hoses and flappers.

Pump
Berkley JG with 9-vane bowl and intake loader, all parts below are new: Hi-Tech Ultimate Wear Ring, “A” impeller that has been blueprinted and indexed, bearings and gaskets, Place electric/hydraulic diverter with helm controls and droop snoot, pressure bypass for cooling water, reverser cable and lever.

Trailer
Tandem axel with new tires, inner fenders and bunkboards. All items listed below are new: Bulldog coupler and jack, safety chains with rubber covers, wiring and four-way flat connector, LED lights including side markers and 3 light bar, hubs/bearings, spring shackle bolts/Teflon liners, tag mount/light, rear tie-down points/straps, powder coated wheels and winch strap/hook.

Other
Items included with boat are new custom trailer-able tarp, slip cover, four rubber fenders, expandable paddle, toss able cushion and ski flag.

[HB Vic]

Looks like a nice boat. I don't know anything about Beachcomber, looks like they were out of Florida in the late 70's?

[bluubyu]

Thank you, built in Dallas TX.

[bluubyu]

This boat was sold last Sunday. Already missing it.....