Search:
Type: Posts; User: Holorinhal; Keyword(s):
Search:
Search took 0.00 seconds; generated 27 minute(s) ago.
-
-
Thanks Kevin. I like it 100% better than the one I had on at the AVI.
This is the scoop that was always planed for this boat. I just didn't have the hardware ready for the AVI trip. I gotta thank...
-
Thanks Dave. Not near as sexy as Your Daytona!
I told You the scoop would look better on my boat than painted white!
-
Thank You, and yes it is called a bowl.
The pictures were taken at Willow Beach, Az, about 11 miles down river from the Hoover dam. Willow is part of Lake Mohave.
-
I will enter the July Hot Boat of the month.
86 ADVANTAGE 18' Bubble Deck.
Restored By me.
489 BBC
Full roller engine w/ solid cam
Edlebrock Victor tr2 Tunnel Ram
dual 600cfm holley blower...
-
This section needs content! I will be the first to post in here. Come on people, post up your rides!
Here are a few pics of my 86 Advantage 18, that I recently finished building.. The hull is...
-
Is every thing ok? I can see all of the pics.
-
After the AVI i fixed all the stuff i seemed to have left undone.
I also wanted to put on the scoop that was intended for this boat. Before i could do that i had to figure a way to mount the scoop...
-
The rest of the pics are just pretty much finished product pics. All in all it was still a fun project.
http://www.performanceboats.com/attachment.php?attachmentid=288010&d=1368626136&thumb=1
...
-
I got the transom plates fabed up.
I made a template, from a piece of sign board. I got a rough shape and then jus refined it until it fit nice and tight.
...
-
I got the transom plates fabed up.
I made a template, from a piece of sign board. I got a rough shape and then jus refined it until it fit nice and tight.
...
-
Started rigging on the transom. I installed a piece of T bolt strut, to mount things on the transom.
I loosiy hung the fuel filter/ shut off valve unit and the duel oil filter.
...
-
I got the boat flipped over, to finnish blending the intake and clearance the hull for the ride plate.
Kevin, i borrowed a little bit of your idea and built somewhat of a rotisserie. I wish i had...
-
I got the mock up engine block set up and ready to go.
http://www.performanceboats.com/attachment.php?attachmentid=251050&d=1364716007&thumb=1
...
-
Got a few parts back from the powder coater, especially the intake. Now I can get it set.
http://www.performanceboats.com/attachment.php?attachmentid=250033&d=1364597780&thumb=1
I took the...
-
Spent time under the dash and got the wireing done.
http://www.performanceboats.com/attachment.php?attachmentid=246282&d=1364187663&thumb=1
...
-
The gauges that were in the boat were 2 1/8" and mine are 2 5/8", so I had to enlarge the holes.
I backed out the holes with a board, so that I could get a centering hole. I used a 2 1/8" hole saw...
-
I got the stringers, bilge and transom, primed today. Tomarrow after the primer has cured,I will sand with 220, and then spray the black gel.
11870
11871
11872
-
This boat has a stock Berkley intake in it and I want to swap it out for the intake from the Kona which is machined for a shoe and ride plate.
I used a propane torch and a floor jack to apply...
-
next I cut up some 9" wide strips of 1708 to use as tabbing. I fitted the bulkheads and tabbed them in place.
11819
11820
11821
11822
-
Thanks Wendi!
Time to tackle the rotten bulk head. I cut out the old bulk head an bilge bulkhead, and ski locker bulkheads.
11805
11806
11807
-
Set up the rail kit, fabed from 2x2x 1/4 aluminum angle.
11790
11791
Battery bracket
11792
-
Ok so for the bad. The faded spot and the holes that I will have to do some creative covering on.
11739
11740
11741
]11742
-
-
Well I have been lurking in here for a while, but have not posted much, so I thought I would share a project that I have been working on for a while. Some of you may have already seen this, but I...
All times are GMT -7. The time now is 12:05 AM.
vBulletin Skin By: PurevB.com
|