Here is my Hotboat originally featured in the October 2000 Issue of Hotboat magazine. 1972 WreidtAttachment 13024Attachment 13022Attachment 13023
Printable View
Here is my Hotboat originally featured in the October 2000 Issue of Hotboat magazine. 1972 WreidtAttachment 13024Attachment 13022Attachment 13023
Looks super clean
Sent from my XT907 using Tapatalk 2
My boat at Canyon Lake, AZAttachment 13025
79 Southwind tunnel dragster
548 chevy 800 hp on 91 built by CLM performace
Attachment 13028Attachment 13029
Here are a few pics of our boat, it is a 19' Centurion tunnel hull, it has a 496 ci. BBC with Accel dfi injection and a 150 hp shot. Lots of one off parts that we built by hand.
Attachment 13032
Attachment 13033
Attachment 13034
Attachment 13036
Attachment 13037
Attachment 13038
Attachment 13039
Attachment 13037
Attachment 13040
Attachment 13035
Attachment 13044 Pirates
FUTS - I love the Southwind Tunnel Dragsters! great looking sled.
Nice boat futs.
My 2005 carrera 257 effect with a 496 ho engine.
This is my 1974 Hondo Runner Bottom T-Deck, she is named Oliver's Twist 713.
It took me 3 years to do a full restoration.
It has an original Dick Vale paint job, Billy B touched up the paint, and Brad did the pin striping and lettering.
It has a Lew Larson motor, 496 cu. in. BBC. Has a 871 blower with two 950 Proform carbs. Steve Peterson rebuilt the V-drive.
All the hardware on the inside was powder coated candy blue and charcoal grey by Full Throttle in Corona, CA.
Attachment 13202Attachment 13203Attachment 13204Attachment 13205Attachment 13206Attachment 13207Attachment 13208Attachment 13208Attachment 13209Attachment 13210Attachment 13211Attachment 13212Attachment 13213
WOW beautiful boat!!! Welcome to Hotboat.com. Great first post
mohave and havasu
This is my 81 miller sprint
b1 racing did my pump and
tom masek power plant
468 rat motor with a little 871 lung on her and a couple 850 toilet bowls on top
she growls pretty good made 900 ponies on 91 pump gas!
I am just a kid being 20 years young when i started this project so i took all the bitchen aspects of what i had seen in boats growing up. I wanted not just a fast boat but some serious bling factor when i finished it , two years later this is what i ended up with! I OWE A HUGE THANKS TO ALL THE PEOPLE WHO HELPED ME FINISH IT! BIG THANKS TO MY DAD FOR ALL THE LATE NIGHTS AND KNOWLEDGE YOUVE GIVEN ME!!
Attachment 13330Attachment 13331Attachment 13332Attachment 13333Attachment 13334
1988 18' Riviera Circle Boat
500 cubic inch blown Chevy
designed by Rusty Beismeyer
Attachment 13636Attachment 13635Attachment 13634
Steve it would look a lot better floating on Parker lol