would my sleek benefit from putting a ride plate and rudder...and maybe a droop?
Printable View
would my sleek benefit from putting a ride plate and rudder...and maybe a droop?
I don't think I've ever seen a jet that didn't benefit from a ride plate.
Along with that the shoe can be experimented with.
I would run the straight nozzle and play with the Place Diverter to see how it feels with lift.
Rudder in my opinion is not needed at all. Helps with low speed tracking, but with tunnels you got that covered.
Just opinions here, not a guru. Just a guy who drives around in circles.
Here's a Rogers drag boat I recently picked up. A lot going on with the plates on this one.
Attachment 66319
WoW... thanks for the detailed post,... just by looking at my boat I was thinking ride plate, I had a couple gull wing boats, both with ride plates, they were amaizing boats, hope the sleek has a similar ride..Quote:
Originally Posted by 76Bonneville
I'm sure the sleek is way heavier, and the tunnel should net a nice ride...I was also thinking tunnel tabs????I took it to get new tires on the trailer yesterday,...and after I got all the interior in...found I have a fuel leak on the port side tank...oh shit....when I got the boat it was only running the starboard side tank... the valve was broke so they ran the one tank only..I don't know if the fuel was spilling from the fill up, or the tank it's self has a leak....but when I got home there was fuel in the port sponson...I cleaned it all out , so if there is fuel in there this morning, the tank is leaking... either way the seats have to come back out....I put 18 gals in that side.....probley a 16 gal tank....anyway, no water test yet...and the wind is howling here in vegas...
Any pics of the Sleek?
Sweet looking squirt.
If you ever upgrade those valve covers and feel like they need a new home, hit me up. I have a little M/T fetish.
That's pretty cool Steve.
:thumbsUp: i like the colors/interior...
Thats bad ass.
She's still just setting,.... and waiting,..and I still haven't ran the boat in the water...too many project lately..
You need Scarlata's help... There will only ever be one JETBOATGURU!!! :party guy:Quote:
Originally Posted by 2FORCEFULL
Looking good 2FF... I really dig the interior and the clean layout of the orange on the white....
My Riviera had a similar mod-vp style bottom. No ride plate, no rudder, but it had a loader grate, a droop, and place diverter. 90 mph on GPS last time it was out, which was 10 years ago, but it was a runner.Quote:
Originally Posted by 2FORCEFULL
You'd see benefit from the droop as it lowers your thrust line and will get more boat out of the water, which will free it up. Diverter is obviously needed, especially with a droop as it adds a few degrees of wedge when it's installed.
Rudders are nice if you're dead stick and trying to maneuver around, but other than that, run it like a jet ski and throttle your way around turns.