Does anyone have some pic's of how to do this? Attachment 65326. Thank You!
Printable View
Does anyone have some pic's of how to do this? Attachment 65326. Thank You!
I would guess several standoffs coming off of your motor plate/blower and whatever else... HEY, that is a NICE bullet (from advanced)!!! The builders of the Farm Truck mill... :)
Check this one out...
Attachment 65412
Im guessing there are two on the bottom port side coming off of the motor plate also... I see two at the top that go to the blower case...
Attachment 65413
Thank You....that really helped!
:action-smiley-035:
Tell us more about your mill and your hull if you don't mind sir... :)
More pics???
Well...It's a #3 Bob Palm 21' GN76 hull(Teague has #4) with a destroked 572(now 470)/1471 (20% underdriven) class legal motor. Just finished removing the trans/turning the motor and changing the fuel delivery with a new rear gas tank. Hopefully will keep running now for more than 2 laps! Testing this weekend....
Attachment 66944Attachment 66945Attachment 66946
You guys in Parker this weekend??
Sent from my iPhone using Tapatalk
Unable due to Family commitment......use a lake near my house.......
Bob, every time I see your boat it seems to be morphing more and more into a full tilt race boat. :D
Looks like you're having a lot of fun with it!
Just copying the "Big Boys".... Ran a 10 lap qualifier last March and "The Boys" were kind enough to let me run on the outside.....too much fun...learned alot! Eric(GN24) lapped me....could not get her to turn. Just trying to get the "old girl" to corner better and need another 10mph on top. Turns much better now and got an old right hand prop from Heath.... Now if I could only find a "Real GN driver"......... Yes having a ton of fun!!!!!!