Can we talk Schiada here???

Printable View

Show 20 post(s) from this thread on one page

09-10-2013, 09:41 AM
WESTERNAERO

so would you go bigger C.I., blower , turbo??

Steve, you've been around these long enough you know the deal. 1000 minimum reliable HP, T400 trans, 29 or bigger gears and it seems to be an 11.5 x 15 is the starting point for a prop.
C.I. equal HP. And power adders are a personal preference for one reason or another.
09-10-2013, 10:01 AM
stoker22405

Quote:

Originally Posted by Adrift

Steve never drove it !! he traded it for a 16' Donzi :shock:

It was my boat that I re-rigged with the 300xs, it was so much fun to drive, fast, quiet and sipped the fuel, PhatCat has it now in Havasu and he loves it :action-smiley-035:

You did a nice job and that boat....
What size shaft and which lower unit and gears is on that motor...?
09-10-2013, 10:03 AM
Blubyu

Quote:

Originally Posted by 2FORCEFULL

I'm not sure what the fascination is for me with schiadas , but I know I have always wanted to have one, and when I get one there is always a reason I can't keep it...
we need a boat to 8 people just to get to the lake with my 3 sons,... economy has them boatless so we have to (get to) haul every one in our boat...

we have to go the cheeper route to own 2 boats ..one for havasu and one for vegas...we currently have a cheetah wild cat being built with a 525 power
and a 240 hallett with 525 power...

my last schiada 22'was powered by a mild built 468, velvet drive w/4% gears...perfect ski set up... the one before 21rc had a billy dunsmore 460 twin turbo, turbo 400 trans.. that boat was cool... it put it on it's nose some where in the 90's... scared the foc out of me... learned real quick to come off the throttle that fast again...

but after riding in Andrews 21 with a wipple got me thinking schiada again...

so would you go bigger C.I., blower , turbo?? Attachment 17725 Attachment 17726 Attachment 17727

Big's boat is bad ass, you need to go for a ride in littles his boat is fun too!
09-10-2013, 10:34 AM
Paul65K

Can we talk Schiada here???

Quote:

Originally Posted by Adrift

Steve never drove it !! he traded it for a 16' Donzi :shock:

It was my boat that I re-rigged with the 300xs, it was so much fun to drive, fast, quiet and sipped the fuel, PhatCat has it now in Havasu and he loves it :action-smiley-035:

Phatcat....now Paul65k still does have it and it is a freakin blast to drive.

I've owned 5 Schiada's (never a 21' Vdrive) but a 21RC with O/D and now the RT with 300XS and I can say that this boat is very controllable and fast....the midrange acceleration (45 - 75) is awesome.

I have never had a boat that handled the chop as well as the RT and judicious use of the tabs will keep the boat absolutely planted in the position you put it in.......the Schiada is heavy for sure compared to some of the lighter boats like a Stoker and surely the top end suffers (mine is right around 80 with 26P 4 blade cleaver) but the extra weight sure make a difference when you are in 3' boat chop :thumbsup

I think this hull design was about 10 years ahead of the O/B technology needed to truly unleash the true potential but now that the 2 are married I think it is the perfect lower cost/maintenance/fuel usage alternative to the grandaddy of them all....the 21' RC with a V-Drive!!!

Sent from my iPad using Tapatalk HD
09-10-2013, 10:35 AM
Paul65K

Can we talk Schiada here???

Quote:

Originally Posted by stoker22405

You did a nice job and that boat....
What size shaft and which lower unit and gears is on that motor...?

20" shaft and 1.75 gears.....spinning 26" 4 clade cleaver !!

Sent from my iPad using Tapatalk HD
09-10-2013, 10:48 AM
Mitch

Quote:

Originally Posted by WESTERNAERO

so would you go bigger C.I., blower , turbo??

Steve, you've been around these long enough you know the deal. 1000 minimum reliable HP, T400 trans, 29 or bigger gears and it seems to be an 11.5 x 15 is the starting point for a prop.
C.I. equal HP. And power adders are a personal preference for one reason or another.

Nailed it :)
09-10-2013, 11:08 AM
Stainless

Can we talk Schiada here???

Quote:

Originally Posted by Paul65K

20" shaft and 1.75 gears.....spinning 26" 4 clade cleaver !!

Sent from my iPad using Tapatalk HD

Paul, will you be trying a 1:62 SM?
09-10-2013, 11:14 AM
Paul65K

Can we talk Schiada here???

Quote:

Originally Posted by Carbon

Paul, will you be trying a 1:62 SM?

That's a great question.......I sure think about it a lot but in the end high 70's is probably fine for me all day long.

My wife starts beating on me at 60+ and really swinging when I get close to 70....so what's the point :D

In all seriousness I think if you want to go faster than 80 it should only be in a V-Drive with full cav plates and a VERY experienced driver........I certainly know my limits and I'm there right now :)

Sent from my iPad using Tapatalk HD
09-10-2013, 12:20 PM
Joker

Quote:

Originally Posted by Paul65K

That's a great question.......I sure think about it a lot but in the end high 70's is probably fine for me all day long.

My wife starts beating on me at 60+ and really swinging when I get close to 70....so what's the point :D

In all seriousness I think if you want to go faster than 80 it should only be in a V-Drive with full cav plates and a VERY experienced driver........I certainly know my limits and I'm there right now :)

Sent from my iPad using Tapatalk HD

Hey Paul, good seeing you here.
09-10-2013, 01:22 PM
Paul65K

Quote:

Originally Posted by Joker

Hey Paul, good seeing you here.

Thanks John,

Nice to be in a place where they don't call you a "Fucking Moron"...........well, at least not yet :D

Show 20 post(s) from this thread on one page