Lets see if we can start a thread about boats

Printable View

Show 20 post(s) from this thread on one page

02-03-2014, 08:36 PM
ogshotgun

Quote:

Originally Posted by SnoC653

You are the one on the left. You've previously stated that the one on the right wasn't you. He was the person driving your boat in a previous photo. The guard hat you are wearing is also a good clue.

you mean the NRI hat my sponsor nick rose insurance ?
02-03-2014, 08:40 PM
ogshotgun

Quote:

Originally Posted by gn7

I did I know this was going to come sooner or later. You trashed people in the open forum minding their own business, and then argue with anybody and everybody, and yet still expect everybody to play nice when you what some info.

If you go with the Aquamet, I would get nothing less than 19, and 22 would be better, and I would get it from the place I posted.
There are other places that sell 22 shafts and I no doubt you know of at least one of them. However, in my book, there have been too many AQ22 very premature failures and nobody seems to be able to explain why. Material source or machining??? Makes NO DIFFERENCE to me, they ALL came from the same place, that a common denominator I would prefer to avoid,
I prefer K monel, but the supplier I was getting shafts from has passed away since making mine, I am not sure at this time where I would suggest getting one.

thank you for the info , iwas told that kmonel shafts glewood sells are from italy but there machining process is not up to the task, just my opinion , and my question is the three that failed were they from the supplier you recommend ?
02-03-2014, 08:41 PM
WESTERNAERO

Quote:

Originally Posted by gn7

I did I know this was going to come sooner or later. You trashed people in the open forum minding their own business, and then argue with anybody and everybody, and yet still expect everybody to play nice when you what some info.

If you go with the Aquamet, I would get nothing less than 19, and 22 would be better, and I would get it from the place I posted.
There are other places that sell 22 shafts and I no doubt you know of at least one of them. However, in my book, there have been too many AQ22 very premature failures and nobody seems to be able to explain why. Material source or machining??? Makes NO DIFFERENCE to me, they ALL came from the same place, that a common denominator I would prefer to avoid,
I prefer K monel, but the supplier I was getting shafts from has passed away since making mine, I am not sure at this time where I would suggest getting one.

Bob, you know where to get a new 500 shaft.
02-03-2014, 08:43 PM
ogshotgun

Quote:

Originally Posted by Hotboat

OG since you feel so strongly about it I have removed the photos. But I can't control who has them or where they post them. And I may not be able to keep them off this site. I personally don't think you have anything to worry about. The guys posting here are no threat to you.

go ahead and put them back up i don't care but got a few calls from friends who heard from other to watch my back.. well i am a MP and a Soldier i watch my back at all times, i usually don't carry at boating events but i will if i feel the need for my and my boats safety..
02-03-2014, 08:45 PM
gn7

Quote:

Originally Posted by ogshotgun

thank you for the info , iwas told that kmonel shafts glewood sells are from italy but there machining process is not up to the task, just my opinion , and my question is the three that failed were they from the supplier you recommend ?

No they were not.

BTW this is the last post I putting up on this or any other subject.
It blows my ass away that the big bad ass that felt it necessary to trash a thread in open discussion because they were talking boats, ha to have is his fucking picture removed because he thinks it was posted for the wrong reasons. GROW A PAIR YOU FUCKING PUSSY.
It the mother fucking internet, Deal with it or get the fuck off.
02-03-2014, 08:47 PM
SnoC653

Quote:

Originally Posted by ogshotgun

you mean the NRI hat my sponsor nick rose insurance ?

Sure looks like a guard hat to me, but the resolution isn't high enough to tell for sure. Lets go with your version, since at any resolution that doesn't look like a guard body wearing it.

I wish you'd make up your mind on if you want people's help or not. Just like the post you deleted, you say you don't want anyone's opinion because you have a group of go to sources and the next thing you know, there is your post bitching that people aren't offering up answers to help you. Make up your mind. That is why people might have something against you, not your boat.
02-03-2014, 08:47 PM
ogshotgun

Quote:

Originally Posted by WESTERNAERO

Bob, you know where to get a new 500 shaft.

i know where to get the material i don't know who can do the machining correctly or would use supplied customer stock, a company called Valbruna sells the k500 and they are out of italy with offices in the usa
02-03-2014, 08:50 PM
Sharp shooter

Quote:

Originally Posted by ogshotgun

yes i am one of these guys lets see my boat is sponsored by NRI so lets see which you guess is me ,, and why ?

I was just curious. I took that photo (and 300 others) and I've never met you in person. I probably know (or have at least met) 95% of everybody on that beach and I'd like to make it 100% whether they like it or not. :D

This is what I look like if it makes you feel better and I have pics of GN-7 too if you want to see him. :D

https://scontent-b-sjc.xx.fbcdn.net/...06_n.jpg?lvh=1

If you want to check out literally 100's of v-drive boat pics go on facebook and search for V-Drive Video Productions. That's where GN-7 spends most of his free time. :D
02-03-2014, 08:51 PM
ogshotgun

Quote:

Originally Posted by gn7

No they were not.

BTW this is the last post I putting up on this or any other subject.
It blows my ass away that the big bad ass that felt it necessary to trash a thread in open discussion because they were talking boats, ha to have is his fucking picture removed because he thinks it was posted for the wrong reasons. GROW A PAIR YOU FUCKING PUSSY.
It the mother fucking internet, Deal with it or get the fuck off.

lets post your picture next with your home address your boat and your schedule see how good you feel ,, and aim not worried about me aim worried about the poor bastard that does the wrong thing...200 posts ago we were bashing my boat than me now the threats , you would of done the same thing , didn't ask for the picture to come down wanted to know the reason behind it
02-03-2014, 08:53 PM
ogshotgun

Quote:

Originally Posted by Sharp shooter

I was just curious. I took that photo (and 300 others) and I've never met you in person. I probably know (or have at least met) 95% of everybody on that beach and I'd like to make it 100% whether they like it or not. :D

This is what I look like if it makes you feel better and I have pics of GN-7 too if you want to see him. :D

https://scontent-b-sjc.xx.fbcdn.net/...06_n.jpg?lvh=1

If you want to check out literally 100's of v-drive boat pics go on facebook and search for V-Drive Video Productions. That's where GN-7 spends most of his free time. :D

its been a rough thread and i got a few calls today from friends who heard from others to watch my back... so was just asking a ?

Show 20 post(s) from this thread on one page