Newest DCB M-35 with Mercury Racing 1350's

Quote:

---

Originally Posted by WESTERNAERO

Why is the diamond stitch not symmetrical and different from seat to seat? I would expect a little more attention to detail for that kind of money. Just saying.

---

Quote:

---

Originally Posted by Unforgiven

your getting anal again....is the stiching on your jetboat perfect?

---

You want to see anal? Pull the pan off your engine and you'll see anal. And its not right out in your face. When you spent close to a million dollars for a boat, anal is what justifies the price. There is nothing else. If you saw the inside of one of those engines compared to yours, you'd puke. There is nothing pretty about that engine aside from of the bling you can see. The crank in you engine looks a piece if sculpture compared the POS in the 1350, and you can't even see it.

Quote:

---

Originally Posted by WESTERNAERO

Nope. But my V-drive doesn't cost a couple hundred grand either. And when I'm done stitching up my new upholstery it will be dam near. Oh yeah. I can do upholstery also. :happy:

---

If I paid that much for that boat, they would be doing the seats over!!! And I doubt that's the only thing I would find in the boat.
The peak at the bottom the head rest should be dead center in the top diamond of the stitching. It is, ONLY on the rear seat on the left side of the boat(right side in the picture) The rest are BULLSHIT. I see the diamond stitching the same as tuck and roll or pleats. If Ford and Chevy can get the pleats in a seat consistent from car to car, let alone side to side in the same car, you would think that a boat company that rapes as bad as that, without a kiss, could get the stitching in the seats better than that.

Quote:

---

Originally Posted by gn7

You want to see anal? Pull the pan off your engine and you'll see anal. And its not right out in your face. When you spent close to a million dollars for a boat, anal is what justifies the price. There is nothing else. If you saw the inside of one of those engines compared to yours, you'd puke. There is nothing pretty about that engine aside from of the bling you can see. The crank in you engine looks a piece if sculpture compared the POS in the 1350, and you can't even see it.

If I paid that much for that boat, they would be doing the seats over!!! And I doubt that's the only thing I would find in the boat.
The peak at the bottom the head rest should be dead center in the top diamond of the stitching. It is, ONLY on the rear seat on the left side of the boat(right side in the picture) The rest are BULLSHIT. I see the diamond stitching the same as tuck and roll or pleats. If Ford and Chevy can get the pleats in a seat consistent from car to car, let alone side to side in the same car, you would think that a boat company that rapes as bad as that, without a kiss, could get the stitching in the seats better than that.

---

Bob, are you trying to say I was being anal on my motor build??

Quote:

---

Originally Posted by Unforgiven

Bob, are you trying to say I was being anal on my motor build??

---

No, I am saying your engine builder was. Don't bullshit me. You chose him build the engine because you knew he was, and justifiably so. You think that if Scott was stitching those seats that the stitching would look like that??
I don't think you would want to speed the money you did you your engine with the same eye for detail as the blind sunofbeach that stitch those seats. And there is 5 of them right out in the open for everybody and his bother to see.
Would you pay 90,000 for a Porsche GT3 that had a half pleat on the right side of one seat, and 3/4 pleat on the left side of another? Would you pay 5,000 for a pin strip suit that the stripes on the pockets did line up with the strips on the jacket.
Sorry, that's not being anal, that BULLSHIT!

Bottom line....That kind of money warrants a "trimmer" to do the upholstery. Who ever did that job couldn't trim his old ladies bush...

That's a beautiful offshore boat. Here's what it would look like with the sportier Lake/River freeboard. :D

http://i208.photobucket.com/albums/b...ps24a63641.jpg

Quote:

---

Originally Posted by WESTERNAERO

Bottom line....That kind of money warrants a "trimmer" to do the upholstery. Who ever did that job couldn't trim his old ladies bush...

---

I don't know how good or bad that upholstery job is from only looking at these pics but.................I do agree that for that kind of $$ you should at the very least get a little "Trim" along with the boat :hilarious:

Quote:

---

Originally Posted by Paul65K

I don't know how good or bad that upholstery job is from only looking at these pics but.................I do agree that for that kind of $$ you should at the very least get a little "Trim" along with the boat :hilarious:

---

When you buy one, YOU are the one getting trimmed. No lube, no kiss, no thank you, no ride home. And somehow, they manage to get the customers happy to give it up. They just drop their drawers, grab their ankles and back in thru the doors with a smile on their face.

Quote:

---

Originally Posted by Sharp shooter

That's a beautiful offshore boat. Here's what it would look like with the sportier Lake/River freeboard. :D

http://i208.photobucket.com/albums/b...ps24a63641.jpg

---

That thing would scare Grads shitless.

Quote:

---

Originally Posted by gn7

That thing would scare Grads shitless.

---

You know GRADS may be a lot of things but I'm guessing he can drive a boat pretty good..........as long as it's not a jet :D

Quote:

---

Originally Posted by Sharp shooter

That's a beautiful offshore boat. Here's what it would look like with the sportier Lake/River freeboard. :D

http://i208.photobucket.com/albums/b...ps24a63641.jpg

---

The real jet boat version would have discolored headers going over the transom and a fat chick in the passenger seat.

Quote:

---

Originally Posted by gn7

That thing would scare Grads shitless.

---

Indeed! lol

Quote:

---

Originally Posted by GRADS

The real jet boat version would have discolored headers going over the transom and a fat chick in the passenger seat.

---

Yours maybe, but not mine. :coffee-n-news: :coffee-n-news:

Bad ass boat !!!!!'

Quote:

---

Originally Posted by WESTERNAERO

Why is the diamond stitch not symmetrical and different from seat to seat? I would expect a little more attention to detail for that kind of money. Just saying.

---

I agree 100%.

Quote:

---

Originally Posted by Lake,an

I agree 100%.

---

Bet the lines all run strait and evenly spaced on your bezer seats, and I bet they didn't cost a fraction of that work. I've been thinking about that interior all day, I just can't get it out of my head. I've seen absolutely beautiful upholstery work that didn't cost more than 10K.

Quote:

---

Originally Posted by WESTERNAERO

Bet the lines all run strait and evenly spaced on your bezer seats, and I bet they didn't cost a fraction of that work. I've been thinking about that interior all day, I just can't get it out of my head. I've seen absolutely beautiful upholstery work that didn't cost more than 10K.

---

Tell yourself it was FREE interior, that came in a 900,000 boat.:wink2:

Quote:

---

Originally Posted by 314joey

I'm guessing over 500K with that power, does anyone know.

---

Just to give a better idea, 500 will just by the engines and drives.

So a friend of mine is a "trimmer", if you call him an interior guy he has a meltdown. He does Pebble Beach cars, Gullwings, Roadsters, blah blah blah. If he saw that shit, god knows what he would say and if he heard the price tag for it, look out!

Quote:

---

Originally Posted by gn7

Just to give a better idea, 500 will just by the engines and drives.

---

it's buy :D

Jesus, I love how the jet boat crowd is complaining about the diamonds on the interior not being symmetrical. :rolleyes Is the duct tape holding your seats into your boat symmetrical?

Quote:

---

Originally Posted by admin2

it's buy :D

---

I understand the 60 hour overhaul is a steal as well:t_lowblow: :wedgie: