Not sure why you deleted your post, but was there an issue with Saleen I should know about?Quote:
Originally Posted by papaletch4130
Sent from my iPad using Tapatalk
Printable View
Not sure why you deleted your post, but was there an issue with Saleen I should know about?Quote:
Originally Posted by papaletch4130
Sent from my iPad using Tapatalk
X2 ? :headscratch:Quote:
Originally Posted by 28eliminator
I think I used Saleen too. They did a great job. My boats capped so they had to take the repair around the rear corner. They did a great job, can't tell there was ever a issue.
Sent from my iPhone using Tapatalk
It's a good place if you want cheap work not quality work!
Are you speaking from first hand experience? If you are, post what he did wrong, what had to be fixed and who fixed it. Slander just to slander gets old fast.Quote:
Originally Posted by papaletch4130
That is exactly what I was trying to avoid. Not trying to ball bust. I will show myself out.Quote:
Originally Posted by Singleton
Avoiding answering specific questions when you are the one bad mouthing a shop. Good bye!Quote:
Originally Posted by papaletch4130
If you had a bad experience post up the facts, if you don't have first hand experience (your boat), shut the F up!
I have seen major problems first hand. Don't get your panties in a bunch... Don't act like a keyboard tough guy either. Cause face to face you would lose. Have a good day.
Don't need to bad mouth any shops. Just post up the shops that you would recommend. Simple
Sent from my XT907 using Tapatalk
Papaletch4130 deleted his post because he didn't want yo go there. I think that was the right thing to do.
Sent from my XT907 using Tapatalk
Let me know how it works out. I would like to get mine repair from beachingQuote:
Originally Posted by 28eliminator
Sent from my XT907 using Tapatalk
KGM (located in east county SD) did repairs to my painted rub rail in the past and will most likely getting that job again (screw in the Springs dock, did some damage). I was happy with that repair. Like the look of a painted rub rail if you don't have the stainless version.
I don't think we need the hostility because of differentiating opinions. He's seen some questionable work, thanks for bringing it to attention. Another member threw out the Saleen name, he responded. I asked the member who threw out their name what his experience with them is with no response as well. Saying good things about a shop just to do so is just as bad as saying something negative as they could be leading someone down a path of questionable work.Quote:
Originally Posted by Singleton
Quote:
Originally Posted by Bobby V
Quote:
Originally Posted by papaletch4130
Just to clarify my previous post on asking the original recommender of their experience.Quote:
Originally Posted by Mateo
Well I'm heading havasu in the morning to see how the boat turned out. Ended up taking it to adrenalin/ Ron's for everything. Wayne gave me a fair price for all the gel repairs and rub rail change. Also had them service the trailer. I'll let you all know how it turned out!!
Sent from my iPad using Tapatalk
Looking forward to the pics ;)Quote:
Originally Posted by 28eliminator
Sent from my Bat Cave
Did you get your boat. How did it come out?
On my way to Havi right now..Quote:
Originally Posted by 240Hallett
Sent from somewhere on the water
Looking forward to seeing the results too. Hope it came out great!!
I'm happy :thumb:
So here's what I had done (all work was done at Adrenalin Detail);
Trailer service, 2006 Extreme triple axle. fixed one of the brake calipers (I brought it to him in a box), new seals and oil in all 6 oil bath hubs, checked all the other brakes. Serviced the Master cylinder, flushed the lines and replaced with new. quoted me $375, bill was $375.
Gel repair. I had several bad gouges, 2 chunks in the rear swim step ( I don't want to discuss how they happened :redface:), Bottom repair (18 years of beaching), and the Port side rear quarter (between the chine and the rub rail) gel was very bad. I can't find any of the gouges or dings now, and the rear quarter repair was a lot of work. 4 colors, blend and clear.. and I cannot find where they blended it into the old. I'm pretty impressed.
3rd was the change out of the rub rail. It had extruded aluminum (black) with a black rubber insert originally (stunning look on a mostly white boat :rolleyes). It was badly dented, and basically looked like hell..LOL! They removed it all, had to do some grinding on the bow due to misalignment, and it appears they buffed the flat area where the rubrail went prior to putting on the new stainless 1 piece (glad they did), as it looked a little ratty before... did I mention this Boat is 18 years old :redface:.
Overall I was pleasantly surprised at the quality of the work, and the cleanliness of the boat when I picked it up. Wayne and Jesse will see more of my boat in the future. great guys, and no surprises in the end.
here's a few pics of the finished product..
Attachment 33963Attachment 33964
Attachment 33965Attachment 33966
Attachment 33967Attachment 33968
Attachment 33969Attachment 33970
Attachment 33971Attachment 33972
Attachment 33973Attachment 33974
Attachment 33975Attachment 33976
Attachment 33977Attachment 33978
Attachment 33979