Took the hallett to mead yesterday....fun day...

Printable View

08-10-2017, 06:29 AM
2FORCEFULL

15 Attachment(s)

Took the hallett to mead yesterday....fun day...

So when I went through the stop to get in lake mead, the ladys says.. the water is up a little...so I said why is the lake soo low... she says, because the people in Henderson drank all the water...LMFAO:secret::secret::yikes::realitycheck: :realitycheck::realitycheck:

...Attachment 65758 Attachment 65759 Attachment 65760 Attachment 65761 Attachment 65762 Attachment 65763 Attachment 65764 Attachment 65765 Attachment 65766 Attachment 65767 Attachment 65768 Attachment 65769 Attachment 65770 Attachment 65771 Attachment 65772
08-10-2017, 07:28 AM
jordy

Well???
08-10-2017, 07:48 AM
2manymustangs

Quote:

Originally Posted by jordy

Well???

^^^ what he said... :D
08-10-2017, 11:11 AM
Ziggy

Can't remember? :)
08-10-2017, 07:21 PM
2manymustangs

2FF, how did the tab modifications work?
08-10-2017, 08:27 PM
ChumpChange

Goooooood times!
08-11-2017, 06:14 AM
2FORCEFULL

Quote:

Originally Posted by 2manymustangs

2FF, how did the tab modifications work?

ok,... took the hallett out that day.... the drive mod worked awesome on hole shot...right on plane ..you could hammer the sticks...or just roll it over on plane...same with mid range... you could really feel the 800 HP... but... going across the lake you had to hit rollers straight across especially on the upper speed range..if you went with the rollers, like following a roll bar boat, it would start rocking back and forth(side to side).... in fact, once it started you al most had to stop to get it to quit...kida like what happened in that video were that boat slammed every one on the boat side too side..sooo.. not good..it has always done that at high speed since it got it so you really had to drive the boat and not hve it trimmed out too much...
08-11-2017, 06:54 AM
2manymustangs

:O

Say, do you know John Cogan at Concept Marine? I was visiting with him this past weekend at the races, he may be able to shed some light on your situation AND be familiar with the set up... I mentioned this to him last Friday when he was describing a similar situation on a customers boat...
08-11-2017, 07:14 AM
2FORCEFULL

Quote:

Originally Posted by 2manymustangs

:O

Say, do you know John Cogan at Concept Marine? I was visiting with him this past weekend at the races, he may be able to shed some light on your situation AND be familiar with the set up... I mentioned this to him last Friday when he was describing a similar situation on a customers boat...

don't know him, but would love to sit and talk with him some day
08-11-2017, 07:16 AM
2FORCEFULL

see my other thread...got it fixed...