Parts needed

[wildbill]

Looking for oil bath caps for my 1968 trailer there made by superior sports specialties Lube Seal brand out of San Fernando Ca they are no longer around hoping some one might have some laying around there 1.980 hub do. Plastic usually tinted light blue w blue center plug for fill in center Any help Wild Bill Sparks Nv. Unable to post pic on pad here will do work later

[Sharp shooter]

Looking for oil bath caps for my 1968 trailer there made by superior sports specialties Lube Seal brand out of San Fernando Ca they are no longer around hoping some one might have some laying around there 1.980 hub do. Plastic usually tinted light blue w blue center plug for fill in center Any help Wild Bill Sparks Nv. Unable to post pic on pad here will do work later

Why can't you use standard buddy bearing caps?

1.980 spindle seal EBAY (http://www.ebay.com/itm/BEARING-BUDDY-KIT-1-SPINDLE-SEAL-FOR-1-980-SEAL-DIAMETER-1-98-/380629060183?pt=Boat_Parts_Accessories_Gear&hash=item589f428a57&vxp=mtr)

1.980 black caps (http://www.ebay.com/itm/Shoreline-Marine-SL52286-Black-Bearing-Protector-Caps-1-980-Pair-/380974497591?pt=US_Taxidermy&hash=item58b3d97f37)

[AZKC]

Looking for oil bath caps for my 1968 trailer there made by superior sports specialties Lube Seal brand out of San Fernando Ca they are no longer around hoping some one might have some laying around there 1.980 hub do. Plastic usually tinted light blue w blue center plug for fill in center Any help Wild Bill Sparks Nv. Unable to post pic on pad here will do work later

I can get them if we don't already stock them. Do they screw in or press in. 1.98 is pretty common size. Ours won't be blue. Probable Steel with a black plug.

[AZKC]

Not sure these would hold oil but they may.

http://www.etrailer.com/Merchant2/graphics/00000001/pics/D/C/DC200L-DCRP_250.jpg

[SnoC653]

Here is what Bill posted on the site. http://www.performanceboats.com/attachment.php?attachmentid=597130&d=1408037584

[wildbill]

I have tried the steel ones they won't hold oil unless you glue the cap on and that makes it difficult to ck level I'll keep looking Thanks SnoC653 for posting pic I had an plastic co here bid to make ones ouch a little pricey to have them made Wild Bill PS AZKC they are pressed in thanks

[2manymustangs]

Did you check w/ these folks? http://www.redneck-trailer.com/


Scroll to section 40 / 41 http://www.redneck-trailer.com/Portals/4/web_content/files/B.pdf

[wildbill]

Was able to repair 1 old one had 3 new ones bought years ago at flea market I'll just keep looking thanks Bill