For you gun guys. And girls

[djunkie]

:eek: :D
38598
38599

[WESTERNAERO]

Looks like you went to a party....

[djunkie]

Looks like you went to a party....

Not quite. I want my own mill now though. :D

[2manymustangs]

Is that your AR10 lower?

[djunkie]

Is that your AR10 lower?

Yep. :D

[WESTERNAERO]

Not quite. I want my own mill now though. :D

Just keep going to the build partys, you save a shit pile of money in the end. And have alot more of those paper weights.

[2manymustangs]

I heard through the grape vine that the feds shut down a build party up north and confiscated all the machinery/lowers and peeps were charged with mfg without a license...???

Seems their excuse was that you had to actually KNOW how to do the work and not just push a button... At least that is the way I heard it...

[WESTERNAERO]

I heard through the grape vine that the feds shut down a build party up north and confiscated all the machinery/lowers and peeps were charged with mfg without a license...???

Seems their excuse was that you had to actually KNOW how to do the work and not just push a button... At least that is the way I heard it...

So you need a license to manufacturer a paper weight? Here we go..........

[Eli]

:eek: :D
38598
38599

Looks great! Gotta hit up Bob and get some shooting in at his "camp".


Looking forward to seeing the final project.

Sent from my Bat Cave

[djunkie]

Looks great! Gotta hit up Bob and get some shooting in at his "camp".


Looking forward to seeing the final project.

Sent from my Bat Cave

Had lunch with him today. Hopefully be out to shoot with him real soon before it gets too hot.

[Eli]

Had lunch with him today. Hopefully be out to shoot with him real soon before it gets too hot.

Keep me posted I'll meet you out there. I want to try his S&W again and his suggested grip. I forgot it :(


Sent from my Bat Cave

[djunkie]

All together. I like it. Had to do a little gun smithing to get the safety to work right. It's a little goofy on this lower. I think they drilled the spring detent hole at the wrong angle. Got it to work fine now though. I'll put the scope on it in a little bit.
38680
38682
38683
38684
38685

[Eli]

Looks good!

I'd like to shoot it is it the same as this?

38686


Sent from my Bat Cave

[djunkie]

Looks good!

I'd like to shoot it is it the same as this?

38686


Sent from my Bat Cave

I'm not sure what caliber that rifle is your holding.

[Eli]

I'm not sure what caliber that rifle is your holding.

308


Sent from my Bat Cave

[djunkie]

308


Sent from my Bat Cave

Yep. Same.

[Eli]

Yep. Same.

That puppy was heavy! If you take it out to River's training camp or HolyMoly's will you let me know? I'd like to see it shot and possibly shoot it.


Sent from my Bat Cave

[djunkie]

38688
......

[djunkie]

That puppy was heavy! If you take it out to River's training camp or HolyMoly's will you let me know? I'd like to see it shot and possibly shoot it.


Sent from my Bat Cave

Mayyyyyybe. :D

[Eli]

Mayyyyyybe. :D

Oh I have plans that day sorry :D


Sent from my Bat Cave

[djunkie]

Under 10lbs.
38690

[Napanutt]

All together. I like it. Had to do a little gun smithing to get the safety to work right. It's a little goofy on this lower. I think they drilled the spring detent hole at the wrong angle. Got it to work fine now though. I'll put the scope on it in a little bit.
38680
38682
38683
38684
38685

Very nice. Gun builds get me semi excited. ;)

[Eli]

Very nice. Gun builds get me semi excited. ;)

You didn't just say that to djunkie? Lol


Sent from my Bat Cave

[BrenMoto]

38688
......

Nice gun


Sent from the belly of the beast

[ogshotgun]

So you need a license to manufacturer a paper weight? Here we go..........
you need a license to produce firearms, that way they can be serial numbered and not in the wrong hands .

[ogshotgun]

308


Sent from my Bat Cave
hope you never actually fire it with your eye against that scope. if you do post the picture of the result

[Eli]

hope you never actually fire it with your eye against that scope. if you do post the picture of the result

No, I didn't shoot it off the back porch of someone's house ;) I was looking to see how well the scope worked. I could practically see Havasu with it. But, if I'm ever that crazy, I'll make sure someone takes a pic ;)


Sent from my Bat Cave

[djunkie]

Very nice. Gun builds get me semi excited. ;)

Ok that was a little creepy. Lol

[djunkie]

I heard through the grape vine that the feds shut down a build party up north and confiscated all the machinery/lowers and peeps were charged with mfg without a license...???

Seems their excuse was that you had to actually KNOW how to do the work and not just push a button... At least that is the way I heard it...

Happened down here at a place in OC. They made it too easy I guess. Preprogrammed cnc machines. All would have to do is clamp it in and press start. You could do 2 lowers in 15 minutes in there.

[djunkie]

Better outside pic.
38708

[WESTERNAERO]

you need a license to produce firearms, that way they can be serial numbered and not in the wrong hands .

You do not need a license to manufacture firearms for your own use. You can never sell it or give it away. But you can make it for yourself.

[djunkie]

You do not need a license to manufacture firearms for your own use. You can never sell it or give it away. But you can make it for yourself.

:thumbup:

[djunkie]

Mounted the bipod finally. It's talking to me. Saying "shoot me shoot me". :D
39796

[Lavey29]

Have you had a chance to shoot it yet?

[djunkie]

Have you had a chance to shoot it yet?

Not yet. I'm hoping to in a couple weeks.

[2manymustangs]

Mounted the bipod finally. It's talking to me. Saying "shoot me shoot me". :D
39796

BOOM... I loves me some 7.62 NATO... :thumb: My first choice for deer hunting...

What kind of barrel did you use?

[2manymustangs]

hope you never actually fire it with your eye against that scope. if you do post the picture of the result

The eye relief of the scope keeps your eye OFF of the scope, that is to say - not against the scope or your scope position/stock position is set up wrong... You should WIKI scope eye relief... http://en.wikipedia.org/wiki/Eye_relief

I will wager that due to the weight and the buffer system DJ's AR10 is ten times smoother to shoot than my 742 remington in the same caliber...

P.S. we DO have the right to build guns, but for our own personal use and they must meet certain ATF/federal standards...

[Eli]

Mounted the bipod finally. It's talking to me. Saying "shoot me shoot me". :D
39796

That baby is screaming my name!


Sent from my Bat Cave

[djunkie]

BOOM... I loves me some 7.62 NATO... :thumb: My first choice for deer hunting...

What kind of barrel did you use?

It's a complete cmmg upper.

[2manymustangs]

Niceeeeeeeee stuff... :)

One of our fellow board members has a new build going on, lets see if I can goad him into posting up some details... :cool

[djunkie]

Forgot I had back up sights to put on.
40210
40211
40212

[ChumpChange]

Since I posted this in the Last Pic thread, I thought I should put in the gun thread.


Gift for a retiring LAPD buddy. 357.

40213

[djunkie]

Hey alright it works. Gun ran flawlessly. Only put around 50 rounds through it though. Just too hot out. Was grouping around 1" at 100 yards shooting from a bipod. Should be better off a bench. Only got a couple pics when my buddy took a whirl with it. Recoil isn't too bad. I thought it would be a little worse being its so light.
40603
40604

[2manymustangs]

:thumb:

[ChumpChange]

Nice. I was wondering what time you would have done that. It's hot out there.

[djunkie]

Nice. I was wondering what time you would have done that. It's hot out there.

Not early enough. We weren't out for very long. Way too hot for this stuff.

[Eli]

Hey alright it works. Gun ran flawlessly. Only put around 50 rounds through it though. Just too hot out. Was grouping around 1" at 100 yards shooting from a bipod. Should be better off a bench. Only got a couple pics when my buddy took a whirl with it. Recoil isn't too bad. I thought it would be a little worse being its so light.
40603
40604

You and your buddy have matching bald...err...hair cuts :D

Did you have fun shooting it? What did you shoot at? How far away were the targets?


Sent from my Bat Cave

[djunkie]

You and your buddy have matching bald...err...hair cuts :D

Did you have fun shooting it? What did you shoot at? How far away were the targets?


Sent from my Bat Cave

Yes we are both hair challenged. I loved the gun. Wish I could have spent a little more time with it but it was just too fucking hot out and I was burning up in that valley. We were shooting at a board about 100 yards out that had some targets on it.

[Sharp shooter]

Now this is a prime photo shop opportunity. :D

(too bad I don't have any time)

http://www.hotboat.com/frm/attachment.php?attachmentid=40604&d=1400361841

[djunkie]

Now this is a prime photo shop opportunity. :D

(too bad I don't have any time)

http://www.hotboat.com/frm/attachment.php?attachmentid=40604&d=1400361841

Sorry to disappoint but that's not me.

[Sharp shooter]

Sorry to disappoint but that's not me.

Who would know....? lol

[djunkie]

Who would know....? lol

My poor buddy shooting the gun

[ChumpChange]

My poor buddy shooting the gun

Sounds like a good conversation:

Dave: You know that boating forum I've told you about.

Buddy: Yeah?

Dave: Well I posted a couple pics of you shooting the AR last weekend.

Buddy: No big deal.

Dave: Well now the pics has been changed where you seem to be getting dry humped by a wild pig while aiming the gun at a guy in a red, white and blue speedo who is deep throating a dildo.

Buddy: ????

[Eli]

My poor buddy shooting the gun

While you're up...lol...do you mind telling me what the difference is between the Gen3 & 4 Glock?


Sent from my Bat Cave

[djunkie]

While you're up...lol...do you mind telling me what the difference is between the Gen3 & 4 Glock?


Sent from my Bat Cave

I'm not sure of all the differences. But the biggest difference that I know of is the grip on the gen 4 is smaller. And it comes with different attachments to customize it to each shooters hand size. Also the slide spring seems lighter. It was way easier to pull back the slide on the gen4 I bought compared to the gen 3 version. Supposedly the gen 4 has a lighter recoil. I'm not really sure as I haven't shot a gen 3 in a long time.

[Eli]

I'm not sure of all the differences. But the biggest difference that I know of is the grip on the gen 4 is smaller. And it comes with different attachments to customize it to each shooters hand size. Also the slide spring seems lighter. It was way easier to pull back the slide on the gen4 I bought compared to the gen 3 version. Supposedly the gen 4 has a lighter recoil. I'm not really sure as I haven't shot a gen 3 in a long time.

👍 now I remember it's the recoil and slide spring that were the main factors.


Sent from my Bat Cave

[djunkie]

👍 now I remember it's the recoil and slide spring that were the main factors.


Sent from my Bat Cave

The grip is a pretty big difference too.

[Eli]

The grip is a pretty big difference too.

Oh yes. Specially for my tiny hands. Thanks!


Sent from my Bat Cave

[SnoC653]

I'm confused why there are no pictures of you shooting? You'll let your buddy shoot your AR but not your
Camera?

[djunkie]

I'm confused why there are no pictures of you shooting? You'll let your buddy shoot your AR but not your
Camera?

Didn't really think about it till after I was done. He shot it last. It was so fuckin hot I was dying to get out of there.